Hydraulic control lever Bracket
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
2 posts
• Page 1 of 1
Hydraulic control lever Bracket
by stammybammy » Thu Apr 04, 2013 7:44 pm
Question.......are there two different size hydraulic control lever brackets maybe in differrent year cubs?........I'm piecing together a 1948 cub that had lots of missing pieces.....bought the bracket used online....seller said it was for a cub.........but when I put it all together the control arm lever misses the pins that limit the range of the lever by an inch??
- stammybammy
- Posts: 11
- Joined: Wed Jan 18, 2012 3:34 pm
- Zip Code: 17847
Re: Hydraulic control lever Bracket
by cub47 » Thu Apr 04, 2013 8:55 pm
This was discussed a while back on this thread, hope this helps you out:
http://farmallcub.com/phpBB2/viewtopic. ... 74#p613974
http://farmallcub.com/phpBB2/viewtopic. ... 74#p613974
- cub47
- 5+ Years
- Posts: 2198
- Joined: Fri Dec 03, 2004 3:17 pm
- Zip Code: 00000
- Tractors Owned: Banned for multiple site rule violations.
- Circle of Safety: Y
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bill, Bob Triplett, midmo, tyecop15 and 14 guests
|
|