Farmall Cub

Tractorboy3 wrote:Hi sent this to you back in January ...

download/file.php?id=10998

I have previously added your information to the database, although it won't show up until I've released the next update, which may be a month or two down the road.
Thanks for submitting your data!

PVF1799 wrote:Here is all the data I could find. I could not find the casting number on the Head , just the Part # with a J underneath it. Where would it be located?

Ken

Ken, I've added your information to the database for the next release. If you could get me the EngSN while you have things apart, that'd be great!
Thanks for submitting your information!

Dale Finch wrote:Raymond, I was helping my neighbor start his '55 cub (that I sold him and may buy back) and took the opportunity to get the numbers:
.....
That's it for now, I will try to get the missing info, if I can.

Thanks Dale, Got it added!

Raymond, my engine serial number is FCUBM 21548

Regards, Ken

Raymond, a neighbor (Hank Reeves) has a cub, and today I stopped by to collect his numbers. Some were difficult and I couldn't get to the head:

S/N
138934 (I THINK!)

ENGINE:
?CUBM 2408
251341R6
11-16-W

TOUCH CONTROL:
354383R3
5-11-W

AXEL TUBE:
350798R7
8-9-W

CLUTCH HOUSING:
351686R2
9-?-W

Raymond,

Here is another cub for the database:
1950 Farmall Cub
Not running - basket case purchased in Dunnellon FL April 2013
SN 105430 (demo range - some white paint found in crevices under red)
Engine SN 106800, casting 3 7 T
Head 2 27 T
Touch control 2 21 T
Torque tube 3 14 T
Transmission 2 27 T
L Final 3 14 T
R Final 3 14 T

Thanks for putting this together for our benefit.

Ron

PVF1799 wrote:Raymond, my engine serial number is FCUBM 21548
Regards, Ken

Thanks Ken, got it updated!

Dale Finch wrote:Raymond, a neighbor (Hank Reeves) has a cub, and today I stopped by to collect his numbers. Some were difficult and I couldn't get to the head:

ENGINE:
?CUBM 2408
251341R6
11-16-W

Thanks Dale! Could you have another look at the Engine SN when you get a chance? Its not an original engine, possibly out of a U-1 power unit. See if you can make out the digit just before "CUBM". Look for either a "U" or "IM".
Thanks!

RonT wrote:Raymond,

Here is another cub for the database:
1950 Farmall Cub
Not running - basket case purchased in Dunnellon FL April 2013
SN 105430 (demo range - some white paint found in crevices under red)

Ron

Thanks for the input Ron! I would be highly surprised if your tractor turned out to be a Demo. Even though its in the "accepted range", all the other tractors around yours have been reported to be red originally. If you could take some photos under the hood and behind the dash, or of any of the white areas you may be seeing, that'd be great!

I've managed to get up to date and back on track! For those that I took a while to get back with, I do apologize, but I do have your information plugged in.

I will be releasing the next update on or around 1 June. If you have your information ready, go ahead and send it to me and I'll make sure it gets added. If you are not ready, no worries, I'm gonna try and get on a bi-annual release schedule, so there'll be another update around 1 November. If you see that your information is incorrect, please let me know and I'll get it corrected ASAP.

As always, if you have submitted some of your information but would like to add more, I'll accept that information anytime.
Thanks to all who have participated!!

Hi Raymond,

Serial#: 136425
Body #: 351686 R2 2
251341R3 4-27-N 11

Shackleton01 wrote:Hi Raymond,

Serial#: 136425
Body #: 351686 R2 2
251341R3 4-27-N 11

Got you loaded in. Which part did the "4-27-N" cast code come from? I'm thinking not from the engine.
Thanks for the input!

It was the engine. Some small screwed on plaque above the serial. not sure what it is.

Shackleton01 wrote:It was the engine. Some small screwed on plaque above the serial. not sure what it is.

The "251341R3" is the block Part Number.
The engine SN is just under the tappet cover to the rear of the engine, stamped on a flat surface: http://www.tmtractor.com/id/id_003.htm

The "4-27-N" does not fit for your block. Are you sure it doesn't have a "W" at the end? Sometimes the "screws" (not really screws) at the end overlap the letters.

Planning on releasing the next update Sunday evening/night. If you have your numbers ready, get them in for this release.
If you can't make it this round, no worries, the next will be on or around 1 November.

Dale Finch wrote:Raymond, I was helping my neighbor start his '55 cub (that I sold him and may buy back) and took the opportunity to get the numbers:

Serial number: 188722 J
Engine: C/C: 3-3-A, P/N: 251341 R7, S/N: FCUBM 190482
Torque Tube: C/C: 1-9-A, P/N: 351686 R2
Transmission: C/C: 5-20-E, P/N: 351530 R7
Axle Tube: C/C: 1-10-A, P/N: 350798 R?
Touch Control: C/C: 2-15-A, P/N: 360719 R1
Head: C/C: 1-27-A, P/N: 251228R1

That's it for now, I will try to get the missing info, if I can.

I have added the missing data above in RED

Thanks Raymond!!

Thanks Dale, Got it updated!!

Hi Ray, I sent you some serial numbers from my 47 cub in a pm. It is in running condition and is slowly being restored. Dan.

Thanks Dan, already have them added!!
Welcome to the Forum!!