Re: Database Information Call...

Mon Jun 10, 2013 5:12 pm

Thanks Dale, Got it updated!!

Re: Database Information Call...

Mon Jun 10, 2013 8:21 pm

Hi Ray, I sent you some serial numbers from my 47 cub in a pm. It is in running condition and is slowly being restored. Dan.

Re: Database Information Call...

Mon Jun 10, 2013 8:22 pm

Thanks Dan, already have them added!! :D
Welcome to the Forum!!

Re: Database Information Call...

Sat Jul 06, 2013 12:33 pm

Here's one more to add to the database:

Tractor Year: 1949
Tractor Serial Number: FCUB-70528

Engine Block (orignial)
Date code: 3/4/S; Part Number: 215 341 R 2 (original)
Serial Number: FCUBM-70528

Engine Block (replaced in 2005)
Date code: 3/23/G; Part number: 215 341 R 7 (replacement)
Serial number: illegible

Cylinder Head (on the tractor when purchased in 2000)
Date code: 10/30/Y; Part number: 2515 288 R 1

Bolster
Date code: 2/2/S; Part number: 350 886 R 2

Torque Tube
Date code: 3/24/S; Part number: 351 686 R 1

Transmission
Date code: 2/22/S; Part number: 351 530 R 1

Axle Extension
Date code: (not found); Part number: 350 798 R 1

Left Final Drive
Date code: 3/24/S; Part number: 350 806 R 2

Right Final Drive
Date code: 3/25/S; Part number: 350 806 R 2

Touch Control
Date code: 1/4/S; Part number: 351 981 R 1

Engine block (only) replaced in 2005 (from a '61?); Long ears on rear fuel tank support
Electric starting and lighting (J-4 magneto); Adjustable front axle; PTO; Touch Control

Jim

Re: Database Information Call...

Sat Jul 06, 2013 1:41 pm

Thanks Jim, I'll get yours added for the next release!

Re: Database Information Call...

Sat Jul 06, 2013 2:20 pm

Raymond - Here's one more for Serial #21005

Axle Extension 8 7 Q

The head - clearly does not have a casting number - Now that it's been sand blasted you can see where the one side of it was supposed to be. Must have been a sand mold failure on mine.

Thanks for the effort it takes to do this.

Ken

Re: Database Information Call...

Sat Jul 06, 2013 2:32 pm

Thanks Ken, I'll get yours updated!

Re: Database Information Call...

Sat Jul 06, 2013 4:30 pm

Raymond

I've got a 1951 Cub.

I only have the serial number just now: 134287

Paul in NJ

Re: Database Information Call...

Mon Jul 08, 2013 10:11 pm

RaymondDurban wrote:
PVF1799 wrote:Raymond, my engine serial number is FCUBM 21548
Regards, Ken

Thanks Ken, got it updated!

Dale Finch wrote:Raymond, a neighbor (Hank Reeves) has a cub, and today I stopped by to collect his numbers. Some were difficult and I couldn't get to the head:

ENGINE:
?CUBM 2408 MCUBM 20487 That's about all I can make out...sorry
251341R6
11-16-W

Thanks Dale! Could you have another look at the Engine SN when you get a chance? Its not an original engine, possibly out of a U-1 power unit. See if you can make out the digit just before "CUBM". Look for either a "U" or "IM".
Thanks!

RonT wrote:Raymond,

Here is another cub for the database:
1950 Farmall Cub
Not running - basket case purchased in Dunnellon FL April 2013
SN 105430 (demo range - some white paint found in crevices under red)

Ron


Thanks for the input Ron! I would be highly surprised if your tractor turned out to be a Demo. Even though its in the "accepted range", all the other tractors around yours have been reported to be red originally. If you could take some photos under the hood and behind the dash, or of any of the white areas you may be seeing, that'd be great!

Re: Database Information Call...

Tue Jul 09, 2013 12:16 am

I don't have anything but the tractor ser. #, but my unrestored (and unrunning) 1947 is 7575. It is still at the farm in Miss. Stan Thigpen

Re: Database Information Call...

Tue Jul 09, 2013 1:51 am

Dale Finch wrote:
ENGINE:
?CUBM 2408 MCUBM 20487 That's about all I can make out...sorry
251341R6
11-16-W


Thanks Dale, that's good info!

thiggy wrote:I don't have anything but the tractor ser. #, but my unrestored (and unrunning) 1947 is 7575. It is still at the farm in Miss. Stan Thigpen


Thanks Stan. Next time you are able, if you could get the engine Cast Code and PN from under the carb, and SN that is under the tappet cover, that'd be great!

Re: Database Information Call...

Tue Jul 09, 2013 2:02 pm

Paul in NJ wrote:Raymond

I've got a 1951 Cub.

I only have the serial number just now: 134287

Paul in NJ

Thanks Paul, if you could get a few more numbers off the engine block, that'd be great. The PN, Casting Code and engine SN would be best, and aren't too difficult to see.
Thanks!

Re: Database Information Call...

Tue Jul 09, 2013 7:03 pm

OK Raymond, I had better get these sent in, Bob helped me get them at the Bash and is probably wondering when I was going to submit them. :D

'51 Cub
Serial # 142635
Engine 9 27 W (also has "SPECIAL" cast, upside down in the block... so far no one can tell me what this is/means)
Touch Control 8 29 W
Tranny 1 7 X (Iknow it was replaced, came from Ralph's "Flamey"!)
Left Final 7 19 S (I know this was also replaced, as was Right Final, but we couldn't see the code)
Torque Tube ? ? W (couldn't make out the #'s)
Sorry, all we could make out

'55 LoBoy
Serial # 897
Engine 7 27 A
Touch Control 6 30 A
Transmission 7 1 A
Right Final 7 26 A
Left Final 7 26 A
Torque Tube 7 4 A
So, it looks like my early LoBoy was assembled with parts that were all cast within about a month!

Thanks!

Re: Database Information Call...

Wed Jul 10, 2013 2:09 am

dgrapes59 wrote:OK Raymond, I had better get these sent in, Bob helped me get them at the Bash and is probably wondering when I was going to submit them. :D ....

Thanks David, I'll get them added!
Could you post a pic of the "special" casting, and post or PM me the engine SN and PN? Might lead us to what the casting means.
Towards the end of 1951, from Sept to Jan of 1952, the block PN changed from R4 to R6, with R5 being used looks like less than a month. I don't now what the changes were, but it look like yours falls at the end of the R5's, beginning of the R6's, so that may have something to do with the special casting.

Re: Database Information Call...

Sun Jul 21, 2013 10:28 am

More numbers for 48 cub ser. no.19129
torque tube- 351686R1 1-28-R
trans.- 351530R1
axle-350798R1
touch control-3511R1 5-21-R
right final-350806R2 2-19-R
left final-350806R2 2-10-R