Sat Jul 27, 2013 12:25 pm
cast codes: engine 251341R6 12-12-X
torque tube 351686-RZ 2-x
touch control 354383R3 12-31-X
r.final 350806 r2 79-X
l.final350806 r3 78-X
r.axle tube 350798-R1 2-23-X
hope this helps.....................John
Sat Jul 27, 2013 2:22 pm
Thanks John, I'll get yours added for the next release!
Sat Jul 27, 2013 4:39 pm
I'm back up to date with everyone's information!
If I haven't responded to a PM I do apologize, I'm certainly not ignoring you! I get quite a few PMs and loose track of who I have responded to and who I haven't. I do have your information plugged in for the next release, which I expect to be around 1 Nov, give or take a day or two.
I'm currently at 1200 lines of information on the FCub, 215 for the LoBoy, and just 98 for the Numbered Series.
I'm now up to 1280 lines for the F-Cub, 221 for the LoBoys, and 101 for the Numbered Series. I've only gotten about 30 lines for the power units so far, but they are slowly coming in.
Thanks Dennis for pinning this thread to the top of the board! Thanks to all who have participated!
Mon Jul 29, 2013 10:37 pm
Here is another one if its not to late.
block- date code-2/10/Y
Part# 251341 R6
Torque tube- date code-2/3/Y
Touch control- date code-2/12/Y
Part# 354383 R3
R.final- date code-2/26/
L.final- date code-2/18/Y
Part# 350806 R
Transmission- date code-2/18/Y
Axle tube-date code-1/5/Y
Tue Jul 30, 2013 7:43 am
amorr19 wrote:Here is another one if its not to late. ...
Thanks Alan, it's never too late!
I do however need the tractor's SN so that I can place it inline within the database.
Tue Jul 30, 2013 10:12 pm
Sorry about that i thought i had everything typed in. Serial # 166175
Tue Jul 30, 2013 10:15 pm
I have another one to add just haven't had a chance to get the numbers yet
Tue Jul 30, 2013 10:47 pm
amorr19 wrote:I have another one to add just haven't had a chance to get the numbers yet
Perfect! Anytime you are ready, I'll take them.
Sat Nov 23, 2013 2:35 am
If you can't make it this round, no worries, the next will be on or around 1 November.
Just wanted to let everyone know that I haven't given up on this project, just got a bit side tracked by a Uncle Sam.
I obviously missed the 1 November deadline, but will release the next update on or about 1 February.
For those that have submitted information hoping to see it added sooner, I do apologize. I still have your information stored on my computer back home, and it'll be included in the next release.
Thanks for your contributions and patience!
Sat Nov 23, 2013 9:35 am
Not a problem Raymond. You've been busy. Thanks for your efforts.
Sat Nov 23, 2013 11:42 am
Thanks for your servive keeping us safe. To bad Billy Ray could not go and help you. LOL
Sat Nov 23, 2013 5:55 pm
Mike in Louisiana wrote:Thanks for your servive keeping us safe. To bad Billy Ray could not go and help you. LOL
Yep, Thanks Raymo for your service, buddy.
Trust me folks, if Billy Ray could have done anything, Raymond would NOT be out of the country. He is getting way behind fixing our broken stuff.
Sun Nov 24, 2013 5:23 am
Mr E wrote:
..... He is getting way behind fixing our broken stuff.
I'll be down that way soon to play catch-up!
Tue Nov 26, 2013 8:39 am
I don't know if this is going to help but.............
I bought a cub this past summer and unfortunately the serial number plate was removed. I believe that the cub is between a '56 or '57 based off the paint scheme that I researched from TM Tractor. The casting numbers that I retrieved from the cub are: Engine Block 5-18-A P/N 251341R7, and the Touch Control 3-30-A P/N 360719R1. Please add these to your database if helpful and if there is anyone out there that offer more clues as to the year and possibly serial number I would really appreciate it.
Also, If anyone needs help finding a plow share for a M193 plow I found one at Joe's Farmall Parts out of Clarion, PA. The P/N I used was CP6174DS and it bolted right on. I believe he carries right and left hand and when I called him I ordered it right over the phone and had it in 3 days.
Thanks for all your help and Love the site.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.