Page 5 of 5

Re: Database Information Call...

Posted: Tue Nov 26, 2013 11:39 am
by Xperimental
glucas14 wrote:I don't know if this is going to help but.............
I bought a cub this past summer and unfortunately the serial number plate was removed. I believe that the cub is between a '56 or '57 based off the paint scheme that I researched from TM Tractor. The casting numbers that I retrieved from the cub are: Engine Block 5-18-A P/N 251341R7, and the Touch Control 3-30-A P/N 360719R1. Please add these to your database if helpful and if there is anyone out there that offer more clues as to the year and possibly serial number I would really appreciate it.



The casting code A would be 1955. The 55 would have been entirely red. The white grill and white hood panel appeared in late 1956. You could also verify the year with the engine serial number. This number is stamped on the block. It is behind the dipstick tube, just below the valve cover. There is a picture of the location on the TM website. On both of my Cubs, I had to scrape some paint off to find the engine serial number.

Re: Database Information Call...

Posted: Tue Nov 26, 2013 12:59 pm
by Xperimental
1956 Farmall Cub
Serial number: 198003
Engine serial number: 210377
Block: 9-6-B part # 251341R7
Torque tube: 7-2-?
Touch Control: 4-30-B

1961 Farmall Cub
Serial Number: 219465
Engine serial number: 237809
Block: 7-11-G part # 251341R7
Head: 5-4-G
Torque tube: 6-2-G
Touch Control 6-8-G

Re: Database Information Call...

Posted: Thu Nov 28, 2013 7:27 am
by RaymondDurban
Thanks fellas for the information! I'll add them to the next release when I get back!

Re: Database Information Call...

Posted: Fri Dec 06, 2013 11:47 pm
by vern b
Hello Raymond,
Here's the numbers of the 1955 cub that I have:
ENGINE # 190792,DATE CASTING # 3-8-A
T/C CAST # 360719R1 DATE CODE 2-8-A
TOURQUE TUBE CAST # L2X DATE CODE 3-23-A
HEAD CAST 3 251228 DATE CODE # 2-21-A

vern b

Re: Database Information Call...

Posted: Sat Dec 07, 2013 6:42 am
by Sandia
1952 Cub

Serial #149756
Eng # CUB M152607
Casting # 1/2/X (Jan 2,1952)
Touch Control #354383R3
Starter #1109611 2017
Torque Tube #351686-R2
Carb #364579 R91

Re: Database Information Call...

Posted: Mon Feb 24, 2014 9:51 pm
by RaymondDurban
I have cought up on all the information that has been given me. I plan on getting the next update out by the end of this week, so if you have anything that you'd like to add before then, please send it to me as soon as possible! Thanks to everyone for contributing! :D

Re: Database Information Call...

Posted: Tue Feb 25, 2014 8:00 am
by Mr E
RaymondDurban wrote:I have cought up on all the information that has been given me. I plan on getting the next update out by the end of this week, so if you have anything that you'd like to add before then, please send it to me as soon as possible! Thanks to everyone for contributing! :D


Did we get the info for you off my junk-man cub? Also, what about your newest purchase?

Re: Database Information Call...

Posted: Tue Feb 25, 2014 8:06 am
by RaymondDurban
Nope, neither one.

Re: Database Information Call...

Posted: Tue Feb 25, 2014 8:01 pm
by Hoyt-Clagwell
The Old Rhinebeck Aerodrome Museum in NY is still using a cub to move airplanes around and cut grass. I was up there last fall and copied down the serial number but almost forgot about it.
Sn - 52593 1948

Re: Database Information Call...

Posted: Thu Feb 27, 2014 2:11 pm
by rjfcsa
Hello Raymond and others,

Here are some of the numbers of part of the cub we have.

My 1947 loader Circle Cub, S.N. 2634, fine mesh grill
Original mag?, S.N. 3309
Engine, S.N. 2948, 251341 R1, 6-20-Q
Cyl. Head, 251228-R1, 6-19-Q
Torque Tube, 351686 R1, 7-3-Q
Tranny, 351530 R1, 7-11-Q
Axle extension, 350798 R1, 7-8-Q
Left Diff., 350806 R1, 7-9-Q
Right Diff., 350806 R1, 7-11-Q
Front engine timing cover, 351674 R1, 6-18-Q
Interesting note the two rear wheel weights have dates codes on them. both are, 351374 R1, 3-28-Q

I hobbled wandered out the shed and with my sisters help got some of the numbers off my early 47 cub.

My 1947 Circle Cub, S.N. 535, :D
fine mesh grill, original narrow 5" rear rims,
Original mag, S.N. 576
Engine, S.N. FCUBM 535, 251341 R1, 4-29-Q
Torque Tube, 351686 1, ?-??-Q worn
No R maybe missed in when they made the mold?
Tranny, 351530 R1, 4-30-Q
Axle extension, 350798 R1, 4-15-Q
Left Diff., 350806 R1, 4-25-Q

My Sisters 1955 cub with fast hitch
S.N. 189670J
Engine, S.N. 191427, 351341 R7, 4-4-A
Torque Tube, 351686 R2, 4-?-A
Tranny, 351530 R6, 4-7-A
Axle extension, 350798 R2, 3-14-A
Left Diff., 350806 R5, 4-1-A
Right Diff., 350806 R5, 3-4-A

I have 3 part cubs and my dad's 58 cub, with I am pretty sure it was the 2nd cub off the line in 58, (204390) but I will have to double check and get the numbers later.

Thanks,
Russel Foster

Re: Database Information Call...

Posted: Thu Feb 27, 2014 6:59 pm
by RaymondDurban
Thanks Russel, all great information, I'll have it added for the next update! Thanks!