This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Measurement Needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
smallfarm
- 10+ Years
- Posts: 231
- Joined: Sat Apr 09, 2011 6:57 pm
- Zip Code: 43078
Measurement Needed
My cub has the front axle off and is backed against a trailer SO....I need the distance between the rear cultivator tool bars. I rooted around and found some flat stock to make the "U" shaped brackets to mount my Wigle hoe. I figure that the "scratchers" must be able to almost touch if their mounting bar is running straight back and if my math isn't to bad I can subtract (or is that square root??) the distances and wouldn't be off by more than a few yards
Make it your ambition to lead a quiet life, to mind your own business and to work with your hands, just as we told you, so that your daily life may win the respect of outsiders and so that you will not be dependent on anybody.
-
Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Re: Measurement Needed
My tool bars are 24" inside to inside of the bends. If you want to clamp another bar onto the straight sections of the cult tool bars, the distance would be at 30". Hope that isn't too confusing.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Re: Measurement Needed
Here's a quick sketch of what I was trying to describe:
Rick
- cult.jpg (282.56 KiB) Viewed 202 times
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Who is online
Users browsing this forum: No registered users and 52 guests
