Transmission Cover Wear - Issues?

Mon Apr 22, 2013 3:47 pm

Could you look at this photo and let me know if this wear pattern will cause issues?

Thanks for you help, Ken

IMG_2113.JPG
You do not have the required permissions to view the files attached to this post.

Re: Transmission Cover Wear - Issues?

Mon Apr 22, 2013 8:25 pm

Was the part with the "H" shaped cutout installed?

Image
Photo courtesy TM Tractor Parts

Re: Transmission Cover Wear - Issues?

Mon Apr 22, 2013 9:10 pm

Yes, that part is in the parts washer.

Re: Transmission Cover Wear - Issues?

Mon Apr 22, 2013 11:48 pm

Time to replace that one. That isn't what you were referring to was it?

Re: Transmission Cover Wear - Issues?

Tue Apr 23, 2013 9:31 pm

The shifter has been broken at some point away from the shaft [ the ball that pivots in the housing not the ball on the end of the shifter ] I would replace it

Re: Transmission Cover Wear - Issues?

Tue Apr 23, 2013 10:08 pm

Boss Hog wrote:The shifter has been broken at some point away from the shaft [ the ball that pivots in the housing not the ball on the end of the shifter ] I would replace it


Shifter.jpg


Ken
You do not have the required permissions to view the files attached to this post.

Re: Transmission Cover Wear - Issues?

Wed Apr 24, 2013 9:12 am

yes

Re: Transmission Cover Wear - Issues?

Wed Apr 24, 2013 9:20 am

Upon further investigation - the Boss Hog Wins. The cup has actually been broken loose and welded. The crack is still visible on the top and it is mostly aligned but not quite. I'm guessing the consensus would be that this should be changed for something with LESS Wear?

Ken

Re: Transmission Cover Wear - Issues?

Wed Apr 24, 2013 9:53 am

Yup