Guys,
I am looking at buying two cubs and 1 of them has a #6 Tool Bar. The owner says that this mower mounts to the tool bar. I have never seen this mower for a Cub and would guess it would be for a bigger tractor due to the weight/size. Any help would be great appreciated.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Name that Mower?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 132
- Joined: Thu Nov 18, 2010 8:43 pm
- Zip Code: 75126
- eBay ID: jlmason81
- Location: Forney, Texas
Name that Mower?
- Attachments
-
- photo.JPG (72.82 KiB) Viewed 290 times
-
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
Re: Name that Mower?
Can you get more pictures? Show the hitch and few more details.
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
-
- 10+ Years
Re: Name that Mower?
That is not for a Cub, looks to be a modified pull behind typical brush hog that was for a 3pt setup.
-
- 10+ Years
- Posts: 111
- Joined: Sat Mar 09, 2013 8:14 pm
- Zip Code: 39338
- eBay ID: dbboss
- Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub
Re: Name that Mower?
Hmmmm. Didn't think about that...... I have the full toolbar in the back & this setup just might work with a light 4' bush hog or finish mower. Lol. I'll try anything once. Does anyone run implements on their cubs where the pto shaft is at that severe of an angle? I don't know how smooth it'd spin, even though I have seen videos of tillers, etc with the pto set up like that.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Name that Mower?
Even if you did modify it to fit behind a cub, the pto spins the wrong direction for any bush hog unless specifically for a cub. Also the pto speed on a cub is much faster than the standard 540 pto. If you buy the cubs, get the bush hog if it's in the deal and you may be able to sell it and get a couple hundred back at best
-
- 10+ Years
- Posts: 132
- Joined: Thu Nov 18, 2010 8:43 pm
- Zip Code: 75126
- eBay ID: jlmason81
- Location: Forney, Texas
Re: Name that Mower?
Thanks guys. I have never seen one like it and from what I can tell it doesn't look modified. The owner is to send me more pictures tomorrow. I will post more as I get them.
Jeff
Jeff
-
- 10+ Years
- Posts: 111
- Joined: Sat Mar 09, 2013 8:14 pm
- Zip Code: 39338
- eBay ID: dbboss
- Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub
Re: Name that Mower?
Chris D wrote:Even if you did modify it to fit behind a cub, the pto spins the wrong direction for any bush hog unless specifically for a cub. Also the pto speed on a cub is much faster than the standard 540 pto. If you buy the cubs, get the bush hog if it's in the deal and you may be able to sell it and get a couple hundred back at best
Dang! Turns backwards for regular implements, huh? Oh well. Back to the drawing board.....lol
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Torque setting for mower blade bolts on a c-3 mower? Attachment(s)
by jackwest » Mon Oct 03, 2022 10:25 pm » in Farmall Cub - 7
- 262
-
by Barnyard
Wed Oct 05, 2022 1:58 pm
-
-
- 1
- 109
-
by Glen
Thu Mar 23, 2023 3:45 pm
-
- 4
- 302
-
by Vern007
Thu May 05, 2022 7:44 pm
-
- 11
- 850
-
by ScottyD'sdad
Sat May 07, 2022 6:28 pm
-
- 5
- 383
-
by Stanton
Wed Apr 06, 2022 9:21 am
Who is online
Users browsing this forum: Glen, Majestic-12 [Bot], mattjs and 7 guests