Fri May 03, 2013 11:19 am
HaHaHa i need a 3 point hitch!
do some work with these Two bottoms!
You do not have the required permissions to view the files attached to this post.
Fri May 03, 2013 11:57 am
What model number of plow is that?
Fri May 03, 2013 12:01 pm
Super A wrote:What model number of plow is that?
it is a IH 309A three bottom turned into a two my uncle got it for 100$ an unbolted the 3rd bottom
moldboards are perfect! i want it myself with a 404 Farmall!
Fri May 03, 2013 12:37 pm
Thought so. Daddy's plow is a 309A. A 404 will pull three bottoms just fine!
Fri May 03, 2013 3:18 pm
Around here we'd only put a 3-bottom plow behind a 404 if we wanted it to keep from rolling down a hill.
Fri May 03, 2013 10:37 pm
Matt Kirsch wrote:Around here we'd only put a 3-bottom plow behind a 404 if we wanted it to keep from rolling down a hill.
Back when they were new they sold a lot of 404's and 424's with 309A plows. These were International 404's not Farmalls. There was only a couple HP difference between the two tractors but the 424 is a little heavier and has 8 speeds instead of 4 on a standard transmission 404. My dad said you would run out of traction before you ran out of power with a 424. It would be neat to have two of them in the same field today to compare how they perform....
I always liked a 404. Our neighbor had one when I was growing up, he was semi-retired by then but I drove it a couple times. It definatley handled better than our 424 but you missed the extra 4 speeds in the transmission!
Guess I rambled a little bit.....
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.