Can someone post pics of clutch shaft zerk fitting, and...

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Mr. Mac
5+ Years
5+ Years
Posts: 6
Joined: Fri Mar 15, 2013 6:10 pm
Zip Code: 99122

Can someone post pics of clutch shaft zerk fitting, and...

Postby Mr. Mac » Tue May 07, 2013 7:32 pm

also, someone had mentioned in my post on this retrofitting a zerk on the older Cubs, if someone could post pics of where to drill, etc... I'd be much obliged. I had the pedal freed up this spring, and it started getting stiff again, spraying some really good lube in there right now with the right wheel up on a ramp to help it flow into the bushing area, but I'd like to get a permanent fix on this ;-)

User avatar
Glen
5+ Years
5+ Years
Posts: 2368
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: Can someone post pics of clutch shaft zerk fitting, and.

Postby Glen » Wed May 08, 2013 2:19 am

Hi,
Here's a picture, hope this is what you wanted.
Attachments
Cub.jpg
Cub.jpg (104.01 KiB) Viewed 298 times

Mr. Mac
5+ Years
5+ Years
Posts: 6
Joined: Fri Mar 15, 2013 6:10 pm
Zip Code: 99122

Re: Can someone post pics of clutch shaft zerk fitting, and.

Postby Mr. Mac » Wed May 08, 2013 7:51 am

Thx Glen!!! ;-)

tst
5+ Years
5+ Years
Posts: 2790
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Can someone post pics of clutch shaft zerk fitting, and.

Postby tst » Wed May 08, 2013 8:43 am

I also put a fitting on the brake cross shaft on the other side as they freeze in the torque tube
Tim

Mr. Mac
5+ Years
5+ Years
Posts: 6
Joined: Fri Mar 15, 2013 6:10 pm
Zip Code: 99122

Re: Can someone post pics of clutch shaft zerk fitting, and.

Postby Mr. Mac » Wed May 08, 2013 3:37 pm

Ok, got it handled, drilled it, tapped it, greased it ;-)

I had the pedal ohhh so freed up last night by driving the tractor up on a car ramp on the right side so I could get some gravity feed through the bushing area, sprayed it over and over with this super Moly lube, Lube it all I think it's called, good stuff and the pedal worked like brand new. But since Glen posted that pic, I had no excuse no to install zerks. Went through the whole shaft on the clutch side, so grease would go all around the shaft/bushing area. Used Shell Super Duty Moly grease, it's called something different now...

And to be nice I took pics, the Cub is a 1948, we've had it in steady use since the 80's, motor was rebuilt some time back.

Image

Image

Image


Thx guys ;-)


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Cubfriend and 4 guests