Installing a belt pulley

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Installing a belt pulley

Postby baldwindiesel » Tue May 07, 2013 10:09 pm

Hello:
I have a complete belt pulley and I am having a hard time getting it to slip onto the PTO shaft. Shaft has been cleaned, is there a simple trick to putting it on ?


Baldwindiesel
baldwindiesel
Cub Star
Cub Star
 
Posts: 113
Joined: Tue Sep 11, 2012 9:21 pm
Zip Code: 44820

Re: Installing a belt pulley

Postby Barnyard » Tue May 07, 2013 11:28 pm

It should slide right on. Does it have a tapered hub like in this video?

It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17501
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Installing a belt pulley

Postby Bill E Bob » Wed May 08, 2013 1:14 am

If you are referring to a right angle belt pulley, it should just slide on the existing PTO shaft. The video is for installation of a mower drive pulley (not the same).
Bill E Bob
501 Club
501 Club
 
Posts: 2782
Joined: Wed May 31, 2006 12:09 pm
Location: OK, Skiatook
Zip Code: 74070
Circle of Safety Award
Circle of Safety: Y

Re: Installing a belt pulley

Postby gusbratz » Wed May 08, 2013 7:35 am

I know when mine comes on and off it is a very precision slip fit on the splines, and then the gearbox housing slips over the round bearing cap on the back of the tractor. I used to use the bolts to pull mine the last bit over that round cap. maybe you don't have the shaft as clean as you think you do. that would be my guess.
gusbratz
Cub Star
Cub Star
 
Posts: 127
Joined: Sun Nov 25, 2012 12:03 pm
Zip Code: 16345

Re: Installing a belt pulley

Postby Bob McCarty » Wed May 08, 2013 8:54 am

Check the ends of the splines for any little burrs. It doesn't take much to keep it from sliding in.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5409
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: Installing a belt pulley

Postby Denny Clayton » Wed May 08, 2013 9:17 am

Bob McCarty wrote:Check the ends of the splines for any little burrs. It doesn't take much to keep it from sliding in.

Bob

A little cleanup of the splines with a file works wonders.
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
501 Club
501 Club
 
Posts: 3587
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y

Re: Installing a belt pulley

Postby baldwindiesel » Thu May 09, 2013 9:11 pm

Thanks everyone, I will give it a try.

Baldwindiesel
baldwindiesel
Cub Star
Cub Star
 
Posts: 113
Joined: Tue Sep 11, 2012 9:21 pm
Zip Code: 44820


Return to Farmall Cub

Who is online

Users browsing this forum: Glen and 4 guests