what bearings and seals does the danco C3 use?

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

what bearings and seals does the danco C3 use?

Postby ad356 » Thu May 09, 2013 12:40 pm

i would like to have a spare set to rebuild one spindle to keep in my cub parts box, just to have them. i ordered them at the dealer but the more i think about it $50+ is probably too much to pay. can you get these bearings at napa. is their a timkin part number? what about seals? is their a seal part number?
ad356
Cub Star
Cub Star
 
Posts: 172
Joined: Sat Sep 08, 2012 10:14 pm
Zip Code: 14113

Re: what bearings and seals does the danco C3 use?

Postby Rudi » Thu May 09, 2013 7:06 pm

Download the RC-1A Rotary Cutters manual and go to page 175 which is Page 1 in Section K. That should answer your questions.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: what bearings and seals does the danco C3 use?

Postby tst » Thu May 09, 2013 7:49 pm

they are common trailer bearings
tst
501 Club
501 Club
 
Posts: 1506
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety Award
Circle of Safety: Y

Re: what bearings and seals does the danco C3 use?

Postby Buzzard Wing » Tue May 14, 2013 8:01 am

See if you can find the IH numbers in here, usually you can cross reference the numbers to Timken pretty easily.

http://www.messicks.com/CAS/64438.aspx
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 9957
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: what bearings and seals does the danco C3 use?

Postby bob in CT » Tue May 14, 2013 9:58 am

Buzzard Wing wrote:See if you can find the IH numbers in here, usually you can cross reference the numbers to Timken pretty easily.

http://www.messicks.com/CAS/64438.aspx

I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
User avatar
bob in CT
Cub Pro
Cub Pro
 
Posts: 5238
Joined: Thu Jun 07, 2007 9:34 am
Location: CT, Manchester
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety Award
Circle of Safety: Y

Re: what bearings and seals does the danco C3 use?

Postby Buzzard Wing » Tue May 14, 2013 10:06 pm

Oops! Thanks Bob.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 9957
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: what bearings and seals does the danco C3 use?

Postby Scrivet » Wed May 15, 2013 7:31 am

bob in CT wrote:........I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
I just took a look at C-3 section in the RC-1A Rotary Cutters. The only "annotation" I see is for a belt on the Lo-Boy. It's in a little yellow balloon. I don't see anything for the bearings. I don't need the numbers, I found them a long time ago by looking at the IH site parts manuals for the IH part number and then doing a NAPA interchange search.

So did my download not take? Are the annotations missing? Can I not see the forest for the trees? :?
Scrivet
501 Club
501 Club
 
Posts: 1315
Joined: Sun Apr 19, 2009 9:51 pm
Location: MO, Potosi
Zip Code: 63664

Re: what bearings and seals does the danco C3 use?

Postby bob in CT » Wed May 15, 2013 8:27 am

Scrivet wrote:
bob in CT wrote:........I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
I just took a look at C-3 section in the RC-1A Rotary Cutters. The only "annotation" I see is for a belt on the Lo-Boy. It's in a little yellow balloon. I don't see anything for the bearings. I don't need the numbers, I found them a long time ago by looking at the IH site parts manuals for the IH part number and then doing a NAPA interchange search.

So did my download not take? Are the annotations missing? Can I not see the forest for the trees? :?

You are correct. Dennis must have an earlier revision done before I rebuilt my C-3 and had to buy all those parts. I'll extract a page or send him a new file to update. My revision number is now 16.4, so it is always being updated and Rudi must have a later version or he would not have known about it. If anyone want my notes, I can email them the pages for the time being.
Spindle housing seal CR 12437
Bearing cup L44610 Timken
Bearing L44643 Timken
Bottom spacer 474 153 R1 new part number: G35361 The bottom seal rides on this and they can get frozen to the shaft.
Belts, B53 and B54 have been used for the 2 deck belts
BP-112 is the main drive belt for both Lo-Boy and Standard IH uses the same part number for both applications: 487 046 R1


I was not in a hurry when I did my job and got a great deal on bearings- 6 for $15 on eBay. Seals came from Rock Auto.
User avatar
bob in CT
Cub Pro
Cub Pro
 
Posts: 5238
Joined: Thu Jun 07, 2007 9:34 am
Location: CT, Manchester
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety Award
Circle of Safety: Y

Re: what bearings and seals does the danco C3 use?

Postby lombard » Thu May 16, 2013 1:30 am

BE SURE TO FILL THE SPINDLE FULL OF GREASE WHEN YOU REASSEMBLE--
PUT IN NEW SEALS--TOP SEAL HOLDS GREASE IN DIRT OUT---BOTTOM SEAL
HOLDS DIRT OUT BUT LETS GREASE OUT---ON FINAL ASSEMBLE YOU SHOULD
HAVE .005 TO .007 PLAY IN BEARINGS---LAST THING TO DO IS PUMP GREASE
IN SPINDLE TILL IT COMES OUT THE BOTTOM SEAL----
-------BE CARE FULL WHICH WAY YOU PUT BOTTOM SEAL IN------
lombard
Cub Star!
Cub Star!
 
Posts: 222
Joined: Sat May 03, 2008 3:26 pm


Return to Farmall Cub

Who is online

Users browsing this forum: Sailor and 5 guests