Page 1 of 1
starter solenoid
Posted: Wed May 15, 2013 8:24 pm
by brichter
Does anyone know what the part number is for the starter solenoid on a 75 Cub? The NAPA number would be great. I can't seem to find anything about the solenoid in the parts manual. The PO had bypassed the clutch safety switch and I would like to get it working again but there again I can't find anything about it. any info on this would be greatly appreciated.
Re: starter solenoid
Posted: Wed May 15, 2013 8:49 pm
by Eugene
Removed the old solenoid and take to any auto parts store. Tell the counter guy/gal it's a 12 volt solenoid. It's actually pretty universal, just some difference in mountings and perhaps the ignition circuit lug.
Re: starter solenoid
Posted: Wed May 15, 2013 8:57 pm
by John *.?-!.* cub owner
I plugged the original number 545 756 R2 into the NAPA cross reference, and got MPE 404SB.
Re: starter solenoid
Posted: Wed May 15, 2013 10:08 pm
by Wakulla Bill
Billy Ray,The part number 545 756 R2 John mentioned has been superseded by number 121613C1. This is what I came up with.
- 101376.jpg (2.07 KiB) Viewed 686 times
echlin ST82
Product Line: Echlin Ignition Parts
Interchange Mfg.: International Harvester
Interchange Mfg. Part Number: 121613C1
: Can use MPE ST82SB