[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - ! Rubber Gas Line? 64 Cub

Re: ! Rubber Gas Line? 64 Cub

Sun May 19, 2013 11:34 pm

Boss Hog wrote:Brandon, I think I have a new one here, if not i can pick you one up at work, I know what you are talking about :wink: , the ends are made to the hose.
Boss

i bent mine on the manifold working it in over it to the carb an bent the top fitting screwing it in cross threaded :big what:
an almost took a hammer to the thing :big angry: took my anger out on the rear lift arm got the three bolts lose :{_}:
an tomorrow im gonna fool with it a little tonight its beer time :-:-): later who knows? :big smile:
Thanks Dave ill trade ya for a 66 model! :mrgreen: Maybe! :wink:

Re: ! Rubber Gas Line? 64 Cub

Mon May 20, 2013 6:42 am

My Cubs done exactly how Eugean said above, and iv never had any problems with it at all, end up having to replace the rubber line every few years, but thats about a 5 minute job

Re: ! Rubber Gas Line? 64 Cub

Mon May 20, 2013 7:16 am

I was doing some work on my cub and decided the old fuel line had to go. I ordered one from TM which fit perfectly but the fittings are of a type I will never use again. I don't care if they are what IH used one of mine didn't break clean forcing the ferrule sideways with a resultant leak on the fitting next to the carb. The one at the tank broke correctly. I bought a new ferrule and nut, a short piece of line and a double compression fitting. Not original but that doesn't bother me. The extra fitting makes it very easy to install the fitting in the carb as the whole thing is kind of double jointed. Vern

Re: ! Rubber Gas Line? 64 Cub

Mon May 20, 2013 5:33 pm

Brendan,

Boss has got what you were asking for. It is crimped on the rubber line kinda like a hydraulic hose.

Tim

Re: ! Rubber Gas Line? 64 Cub

Mon May 20, 2013 8:24 pm

Here you go, I've had this rubber fuel line from Stevens on my tractors for over 10 years, no problems.

Re: ! Rubber Gas Line? 64 Cub

Mon May 20, 2013 8:32 pm

Three feet? Probably less than half that, unless you make a mistake, lol. Mine is already bogered up with a rubber hose and wrong fittings, maybe someday.

Re: ! Rubber Gas Line? 64 Cub

Tue May 21, 2013 9:30 am

Eugene wrote:$5.00 answer. Cut off the old fuel line about 1 1/2 to 2 inches from the fittings. Remove burs with file and straighten out any major deformations. Take old metal fuel line into any auto parts store. Order 3 feet of "rubber" fuel line to fit the old metal fuel line and 2 hose clamps.


+1
thats how i do them, then i add an inline filter into the rubber section while i'm at it to keep the carb clean.

Re: ! Rubber Gas Line? 64 Cub

Thu May 23, 2013 7:47 pm

ibrake4rust wrote:Here you go, I've had this rubber fuel line from Stevens on my tractors for over 10 years, no problems.
The BIG! question is!
Are the Two fitting's on it are they the Same as the Size as the original one's on the New Replacement Lines from TM
:?: :?: :help:

Re: ! Rubber Gas Line? 64 Cub

Thu May 23, 2013 7:55 pm

I told you I have what you want, it has the correct ends

Re: ! Rubber Gas Line? 64 Cub

Thu May 23, 2013 7:58 pm

Boss Hog wrote:I told you I have what you want, it has the correct ends
Ok David gotta picture Price? :big laugh: