Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
10 posts • Page 1 of 1
I bought a 1952 Cub last fall. Used it lightly a couple times and it ran fine. One day it started blowing black liquid out the exhaust, which I thought was oil. I deducted it had a broken oil ring and stopped using it. Recently I decided to take off the head and oil pan and check it out. No broken ring was found. It was standard bore with only about .002" cylinder wear. Rings had an end gap of .045" and the valves felt a little loose in the guides so I replaced the rings (now .020" end gap), valves and guides. It now has 90 lbs compression on each cylinder. I also put a kit in the carb. I put it back together and cranked it up and you guessed it...it is still blowing out black liquid.
I have checked the pipe from the breather to the crankcase and it is clear. I did not replace plugs but they are all firing. I am at a loss as to what to check next. ANY suggestions would be appreciated.
Could it be condensation? I see a lot of cars and trucks that leak water from the exhaust, i know that is condensation. Maybe your tractor has black soot in the pipe that turns the water black. I would taste it to make sure it is not antifreeze and i would let it roll.
Have A Nice Day!
Mine gets that also. I don't use it as much and long as I should. It clears up when I do run it for a spell. I'm sure it's condensation. Grump
David Dee Mock-Leonard
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
If it is just shortly after start up, it is probably moisture that has condensed form the hot exhaust coming up through the cool stack and carrying carbon with it. A common problem with vertical exhaust tractors.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
i have the same problem on my H, have been told it is just condensation combining with soot, it usually clears up after a bit, i thought it was oil to at first
I ran it up and down some hills and it runs clean when pulling and smokes as it is backing off. Still spitting out black liquid until it warms up. I will just run it some. Maybe the smoke is because the new rings are not seated yet.
Yea, I found my problem!! The cub was used at a seasonal recreation facility that my son owns (Colorado Pumpkin Patch) and he uses a lot of young people to help. He had five gallons of diesel fuel for another tractor he had rented and apparently it got put in the cub. I finally figured this out after I spent over $300 on buying rings and a complete valve kit and many hours labor thinking it was a broke ring. I had just about given up hope when I thought of this and ask my son where the 5 gallons of diesel fuel was and he didn't know. I drained it all out and put in a gallon of fresh gasoline and it fired right up and ran clean.
One positive is I now have a rebuilt engine. A fresh rattle can paint job, a new seat cover and we are back in business.
Thanks Guys for all the suggestions. I was just sure it was more than condensation as it started very poorly and the smoke was not stopping.
Sure looks nice for a rattle can job!
Know Your Cub, And Your Cub Will Know You.
Who would have thought that a Cub can run on diesel
Kinda explains the black smoke huh
Nice looking Cub, real nice job for a rattle can
10 posts • Page 1 of 1
Who is online
Users browsing this forum: Bezirk and 5 guests