Brake pedal

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Brake pedal

Postby dickcub50 » Tue May 28, 2013 2:57 pm

How do you remove the left brake pedal? I need to remove the
platform for refinishing, sandblasting & paint. Do I have to press
out the long shaft, if so will this do anything to the clutch assembly?
Replacing the transmission oil seals and figured it time to do the
shaft housing & platform.
Could not fine info in my manual.
1- 1950 cub
1- 1950 cub demonstrator
1- 1958 International cub lo-boy
1- Allis Chalmers 720
dickcub50
5+ Years
5+ Years
 
Posts: 178
Joined: Mon Jul 03, 2006 8:00 pm
Location: Ca. Yuba City, 95993
Zip Code: 95993
Tractors Owned: Allis challmers 720
1950 Cub
1950 Cub Demo
1958 International Cub
Lo-boy
1963 International Cub Lo-Boy
& Cub implements

Re: Brake pedal

Postby tst » Tue May 28, 2013 3:48 pm

to remove the left pedal,yes the shaft has to come out, the hard part is most of the time that the pedal is seized to the shaft, some times they fall off, other times you need explosives
Tim
tst
501 Club
501 Club
 
Posts: 1581
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety Award
Circle of Safety: Y

Re: Brake pedal

Postby Mike in Louisiana » Tue May 28, 2013 5:01 pm

I belive there is a how to by Ralph, and he has done a lot of them.

check how to forum
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
User avatar
Mike in Louisiana
5+ Years
5+ Years
 
Posts: 4203
Joined: Tue Feb 15, 2005 10:10 am
Location: LA, Doyline
Zip Code: 71023
Circle of Safety Award
Circle of Safety: Y

Re: Brake pedal

Postby dickcub50 » Thu May 30, 2013 9:28 pm

IMG_7110x.jpg
IMG_7110x.jpg (164.48 KiB) Viewed 438 times
IMG_7108x.jpg
IMG_7108x.jpg (154.84 KiB) Viewed 438 times
Thanks for your help, mission accomplished. Made a puller from a piece
of 2- 3/8" sq. tubing. Cut 3/4" slot and welded the piece on top. Drilled
and taped 1/2-20 NF. Had kroil oil in peddle for 24 hours and used puller
the brake peddle cam off easily.
1- 1950 cub
1- 1950 cub demonstrator
1- 1958 International cub lo-boy
1- Allis Chalmers 720
dickcub50
5+ Years
5+ Years
 
Posts: 178
Joined: Mon Jul 03, 2006 8:00 pm
Location: Ca. Yuba City, 95993
Zip Code: 95993
Tractors Owned: Allis challmers 720
1950 Cub
1950 Cub Demo
1958 International Cub
Lo-boy
1963 International Cub Lo-Boy
& Cub implements

Re: Brake pedal

Postby Pickerincal » Thu May 30, 2013 11:30 pm

I had to heat the heck out of it plus drill out the bolt.. It was the most difficult froze up thing I have taken apart on my Cub so far. I would heat it then quench with Sea Foam and heat again.

Good luck....Heat heat heat...
Pickerincal
Cub Star
Cub Star
 
Posts: 75
Joined: Sat Jun 23, 2012 11:42 pm
Zip Code: 93455
Tractors Owned: 1947 Cub
1967 Cub Cadet
1972 Loadstar 1600
Circle of Safety Award
Circle of Safety: Y

Re: Brake pedal

Postby bob in CT » Fri May 31, 2013 11:45 am

Excellent solution. Beating on the shaft with a punch is a death knell as it is soft and mushrooms easily. looks like a "tip of the week" to me.
User avatar
bob in CT
Cub Pro
Cub Pro
 
Posts: 5239
Joined: Thu Jun 07, 2007 9:34 am
Location: CT, Manchester
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety Award
Circle of Safety: Y

Re: Brake pedal

Postby Rudi » Fri May 31, 2013 6:28 pm

All done Bob....

I saw it earlier and if I had been less winded, it would have been up earlier.

Cub Tip of the Week! May 31, 2013

Excellent solution Dick, I like that - using what you have to git-r-done :big smile:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Brake pedal

Postby PVF1799 » Fri May 31, 2013 7:53 pm

Well, sure wish this post had been here before I went throught the antics I did with the press. I kroiled mine for 10 days and it still took a full 20 tons of pressure under heat before mine popped 1/64".

Thanks for sharing.
Ken
Pleasant View Farm - Est. 1799
My Restoration Project - FCUB '48 - Rex
User avatar
PVF1799
501 Club
501 Club
 
Posts: 1097
Joined: Fri Mar 15, 2013 9:46 pm
Location: Altamont, NY
Zip Code: 12009
Skype Name: ken.r.rau
Tractors Owned: 1929 Farmall Regular (Original Owner)
1947 Farmall H #265658X1
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower.
Circle of Safety Award
Circle of Safety: Y

Re: Brake pedal

Postby tst » Fri May 31, 2013 8:16 pm

I also have a puller/press like the one above and have had some it will not even budge after being heated many times
tst
501 Club
501 Club
 
Posts: 1581
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: deane19351, GenrlCub, Jeff Silvey, Tubby Creek Farm and 6 guests