Manual Lift Assembly Diagram

Sat Jun 08, 2013 7:41 pm

Our 48 FCUB does not have TC. I've looked through all the manuals I've printed and don't see a parts list for this assembly. What I am trying to locate is the original way the spring assist was attached at the back.

For years, we've had some piece of chain that's not original equipment. Could you kindly point me in the direction of the correct manual for this attachment?

Thanks.
Ken

Re: Manual Lift Assembly Diagram

Sat Jun 08, 2013 7:55 pm

Here is the parts breakdown.

Image

Here are a couple pix of mine.

Image

Image
I have seen the spring loop mounted from the front and back on different tractors. I am not sure which is correct or if it matters.

Re: Manual Lift Assembly Diagram

Sat Jun 08, 2013 8:43 pm

Barnyard beat me to it.
Larry 1948 001.JPG
Larry 1948 002.JPG
You do not have the required permissions to view the files attached to this post.

Re: Manual Lift Assembly Diagram

Sat Jun 08, 2013 8:58 pm

Thanks Barnyard.

I am missing part #11 from the diagram. Spoke with Dad - he can't recall why this part is gone and replaced by a chain.

Ok-who's got one I can purchase or one they can template on cardboard, so I can make one.

All the help is much appreciated. BTW, Barnyard - what book is that diagram out of?

Ken

Re: Manual Lift Assembly Diagram

Sat Jun 08, 2013 9:06 pm

Ken, it is on the manual server under "Cub Parts Manual". It is CBI-1A Revision 12 section 13 - "Common Units"

Re: Manual Lift Assembly Diagram

Mon Jun 10, 2013 5:21 pm

Ken:

Almost all of the Cub Implement Manuals will have a section on the Master Control Lever as well. Just a little trivia :)

Re: Manual Lift Assembly Diagram

Mon Jun 10, 2013 9:14 pm

Ken, If you are missing part #11 you will need #10 as well. Part # 11 to my manual lift was very worn. I had a machinist weld a bushing into my part #11. It is not free flowing like it was in its original design, but so far it works. Mike

Re: Manual Lift Assembly Diagram

Mon Jun 10, 2013 9:25 pm

Thanks, I'll check it when it's disassembled. Right now the original bolt is still through part #10, except a chain link is where #11 would be bolted.

I'll need someone to template #11 for me so I can make one - unless one of ya'll has one for sale.

Ken