Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
I got a new distributor drive housing in yesterday and cannot figure out how it is supposed to attach to the front cover. The housing has a threaded hole on the top and a smooth hole on the bottom. The hole in the front cover has a threaded hole on top and a threaded hole on the bottom.
How am I supposed to attach the top of the housing? The service manual shows a stud coming out from the top hole. I still have the stud I took out of the hole. I can't figure out how a stud and a threaded hole are supposed to work together. I've image searched and can only find pictures of housings by themselves. No good pictures of housings on the tractor.
'48 Cub 12V Conversion, Zenith Carb, Electronic Ignition
- Cub Star
- Posts: 108
- Joined: Thu Feb 21, 2013 10:04 pm
- Location: Brandon, MS
- Zip Code: 39042
- eBay ID: ccbil
- Tractors Owned: '48 Cub (Great Granddaddy's)
And some bigger ones.....
it uses a special stud, 3/8 -16 on the block side and its reduced to 1/4-28 to come through the housing adapter
- 501 Club
- Posts: 1501
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Return to Farmall Cub
Who is online
Users browsing this forum: No registered users and 4 guests