Wed Jun 19, 2013 7:43 pm
While mowing with our 1950 Cub, lost the radiator cap. The original cap only had a rubber gasket. Was advised that a low pressure cap could be used (7 lbs). Would this be a problem if this cap is used in lieu of the original type?
Wed Jun 19, 2013 8:26 pm
Not problem I have a 75 cub that was bought new. I replaced the cap in 1990 with a 7 lb cap. No problem. If you have a TSC store near you they have the exact no pressure cub replacement. I was there two weeks ago buying a belt and found one.$6.99 plus tax. I bought one for a 49 cub I just got running this year. Trying to avoid Murphy"s law.
Wed Jun 19, 2013 8:36 pm
Probably not. But radiator might spring a leak if getting is thin, old, has weak spots.
Suggest installing the radiator cap to the first notch, not fully tightened down.
Thu Jun 20, 2013 7:07 am
Next time you place an order with TM Tractors, one of our sponsors, you can buy the correct cap, although I have always had a pressure cap on my 1952 since getting it in '92.
Thu Jun 20, 2013 7:50 am
I have a pressure cap that came on one of my cubs that has a chunk of about 1/8 of the bottom rubber gasket removed. The little gap keeps it from sealing and allows the pressure to escape.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.