TC-37F Rev 4 - revised and/or supplementary pages Group 8 Electrical - Pages 5, 6, 9 through 45
page 5 has an "ALTERNATOR GENERATOR AND CONNECTIONS" in the left column and a generator in the right column (looks like the same generator picture that's in rev 3). Alternator is part # 1 100 583 and is "-42 AMPER-". No I didn't forget the second E, but IH did .
page 6 is all generator parts that I can tell.
page 9 is the "ALTERNATOR GENERATOR -DELCO REMEY- -W/INTEGRAL SOLID STATE VOLTAGE REGULATOR-" exploded diagram and parts list for the "ALTERNATOR GENERATOR ASSY -42 AMPERE-"
The rest of the pages are for the starter, lights, and wiring digrams.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Oil in fan housing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Oil in fan housing
So that rev is the first one that captures the changes in the Long Stripe Cub.
-
- 5+ Years
- Posts: 3
- Joined: Fri May 15, 2015 7:53 am
- Zip Code: 45365
Re: Oil in fan housing
Hello all,
Not to beat a drowned horse...the screw for filling the housing, it says at the right horizontal position...is that the carb. side or the started side...? Picture in the manual is pointed down., as if it is to drain the excess.
Thanks!
Not to beat a drowned horse...the screw for filling the housing, it says at the right horizontal position...is that the carb. side or the started side...? Picture in the manual is pointed down., as if it is to drain the excess.
Thanks!
- Attachments
-
- Fan Hub lubrication.pdf
- (149.49 KiB) Downloaded 203 times
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Oil in fan housing
Right versus left is just like a car. From the way you sit on the tractor, so the carb is on the left. They mention that in the introduction, I think.
-
- 5+ Years
- Posts: 3
- Joined: Fri May 15, 2015 7:53 am
- Zip Code: 45365
Re: Oil in fan housing
The srew then will be pointed to the right(starter side)
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Oil in fan housing
Farmall_1957 wrote:The srew then will be pointed to the right(starter side)
You've got it.
-
- 5+ Years
- Posts: 3
- Joined: Fri May 15, 2015 7:53 am
- Zip Code: 45365
Re: Oil in fan housing
Thanks!
Who is online
Users browsing this forum: No registered users and 24 guests