This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Oil in fan housing

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Scrivet
10+ Years
10+ Years
Posts: 2929
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: Oil in fan housing

Postby Scrivet » Sun Jun 23, 2013 12:39 pm

TC-37F Rev 4 - revised and/or supplementary pages Group 8 Electrical - Pages 5, 6, 9 through 45

page 5 has an "ALTERNATOR GENERATOR AND CONNECTIONS" in the left column and a generator in the right column (looks like the same generator picture that's in rev 3). Alternator is part # 1 100 583 and is "-42 AMPER-". No I didn't forget the second E, but IH did :lol: .

page 6 is all generator parts that I can tell.

page 9 is the "ALTERNATOR GENERATOR -DELCO REMEY- -W/INTEGRAL SOLID STATE VOLTAGE REGULATOR-" exploded diagram and parts list for the "ALTERNATOR GENERATOR ASSY -42 AMPERE-"

The rest of the pages are for the starter, lights, and wiring digrams.

SPONSOR AD

Sponsor



Sponsor
 

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6018
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Oil in fan housing

Postby bob in CT » Sun Jun 23, 2013 1:03 pm

So that rev is the first one that captures the changes in the Long Stripe Cub.

Farmall_1957
5+ Years
5+ Years
Posts: 3
Joined: Fri May 15, 2015 7:53 am
Zip Code: 45365

Re: Oil in fan housing

Postby Farmall_1957 » Fri May 15, 2015 3:19 pm

Hello all,

Not to beat a drowned horse...the screw for filling the housing, it says at the right horizontal position...is that the carb. side or the started side...? Picture in the manual is pointed down., as if it is to drain the excess.

Thanks!
Attachments
Fan Hub lubrication.pdf
(149.49 KiB) Downloaded 199 times

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6018
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Oil in fan housing

Postby bob in CT » Fri May 15, 2015 4:14 pm

Right versus left is just like a car. From the way you sit on the tractor, so the carb is on the left. They mention that in the introduction, I think.

Farmall_1957
5+ Years
5+ Years
Posts: 3
Joined: Fri May 15, 2015 7:53 am
Zip Code: 45365

Re: Oil in fan housing

Postby Farmall_1957 » Fri May 15, 2015 4:32 pm

The srew then will be pointed to the right(starter side)

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6018
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Oil in fan housing

Postby bob in CT » Fri May 15, 2015 4:43 pm

Farmall_1957 wrote:The srew then will be pointed to the right(starter side)


You've got it.

Farmall_1957
5+ Years
5+ Years
Posts: 3
Joined: Fri May 15, 2015 7:53 am
Zip Code: 45365

Re: Oil in fan housing

Postby Farmall_1957 » Fri May 15, 2015 9:19 pm

Thanks!


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 23 guests