Page 2 of 2

Re: Oil in fan housing

Posted: Sun Jun 23, 2013 12:39 pm
by Scrivet
TC-37F Rev 4 - revised and/or supplementary pages Group 8 Electrical - Pages 5, 6, 9 through 45

page 5 has an "ALTERNATOR GENERATOR AND CONNECTIONS" in the left column and a generator in the right column (looks like the same generator picture that's in rev 3). Alternator is part # 1 100 583 and is "-42 AMPER-". No I didn't forget the second E, but IH did :lol: .

page 6 is all generator parts that I can tell.

page 9 is the "ALTERNATOR GENERATOR -DELCO REMEY- -W/INTEGRAL SOLID STATE VOLTAGE REGULATOR-" exploded diagram and parts list for the "ALTERNATOR GENERATOR ASSY -42 AMPERE-"

The rest of the pages are for the starter, lights, and wiring digrams.

Re: Oil in fan housing

Posted: Sun Jun 23, 2013 1:03 pm
by bob in CT
So that rev is the first one that captures the changes in the Long Stripe Cub.

Re: Oil in fan housing

Posted: Fri May 15, 2015 3:19 pm
by Farmall_1957
Hello all,

Not to beat a drowned horse...the screw for filling the housing, it says at the right horizontal position...is that the carb. side or the started side...? Picture in the manual is pointed down., as if it is to drain the excess.

Thanks!

Re: Oil in fan housing

Posted: Fri May 15, 2015 4:14 pm
by bob in CT
Right versus left is just like a car. From the way you sit on the tractor, so the carb is on the left. They mention that in the introduction, I think.

Re: Oil in fan housing

Posted: Fri May 15, 2015 4:32 pm
by Farmall_1957
The srew then will be pointed to the right(starter side)

Re: Oil in fan housing

Posted: Fri May 15, 2015 4:43 pm
by bob in CT
Farmall_1957 wrote:The srew then will be pointed to the right(starter side)


You've got it.

Re: Oil in fan housing

Posted: Fri May 15, 2015 9:19 pm
by Farmall_1957
Thanks!