Page 2 of 2

Re: fast hitch flail mower

Posted: Mon Jun 24, 2013 8:30 pm
by phildidit
Be sure you install with the spacer, you will have vibrating issues if you don't put that cutter axle back to gather the correct way. I have a extra spacer that you can use to copy.[/quote]


If you have pictures or a drawing of the spacer and or the grease shield it would be great. I have the manual but the pics are kind of grainy and I am not sure whoever changed the bearing put it back right. I did have vibration, that is why I tore it down to replace the bearings.

Re: fast hitch flail mower

Posted: Mon Jun 24, 2013 9:27 pm
by Buzzard Wing
This may help decipher the numbers?? 206 is the base bearing (dimensions) and each Mfg. uses their own prefixes and suffixes. So, 206 KLL is 2 'mechani-seals' (trade name for their seal) from Fafnir (Timken).

http://www.daltonbearing.com/uploadFile ... NGULAR.pdf