Firing it up Again..... Any tips or tricks?

Mon Jun 24, 2013 9:43 pm

Just need to top off the fluids and I think the Cub will be ready to go. Still needs coolant. Still need to grease the distributor shaft. And it needs a splash of gas. And the oil cup needs filled.

Anything else I need to check? The oil is fresh with a new filter. Any first time starting tips?

Re: Firing it up Again..... Any tips or tricks?

Mon Jun 24, 2013 9:46 pm

Make sure oil pump is primed. Check to make sure you have oil pressure after starting.
Last edited by tmays on Tue Jun 25, 2013 11:10 am, edited 1 time in total.

Re: Firing it up Again..... Any tips or tricks?

Tue Jun 25, 2013 8:20 am

Don't forget to grease the throw out bearing (TOB)

Re: Firing it up Again..... Any tips or tricks?

Tue Jun 25, 2013 10:51 am

Might want to refer to the Owner's Manual for all the various lube and fluid locations before cranking her up.

Here: http://www.cleancomputes.com/Cub/Cub%20 ... index.html