Firing it up Again..... Any tips or tricks?

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Firing it up Again..... Any tips or tricks?

Postby DieselDennis » Mon Jun 24, 2013 9:43 pm

Just need to top off the fluids and I think the Cub will be ready to go. Still needs coolant. Still need to grease the distributor shaft. And it needs a splash of gas. And the oil cup needs filled.

Anything else I need to check? The oil is fresh with a new filter. Any first time starting tips?
'48 Cub 12V Conversion, Zenith Carb, Electronic Ignition
User avatar
DieselDennis
Cub Star
Cub Star
 
Posts: 109
Joined: Thu Feb 21, 2013 10:04 pm
Location: Brandon, MS
Zip Code: 39042
eBay ID: ccbil
Tractors Owned: '48 Cub (Great Granddaddy's)
And some bigger ones.....

Re: Firing it up Again..... Any tips or tricks?

Postby tmays » Mon Jun 24, 2013 9:46 pm

Make sure oil pump is primed. Check to make sure you have oil pressure after starting.
Last edited by tmays on Tue Jun 25, 2013 11:10 am, edited 1 time in total.
Thomas
tmays
501 Club
501 Club
 
Posts: 1426
Joined: Wed May 11, 2011 8:59 pm
Location: Raymond, MS
Zip Code: 39154
Tractors Owned: 1972 Cub
1947 Cub
1952 Cub
152 plow
1953 Farmall Super C
154 Cub Loboy
44 LB Woods mower
23A disk
144 Cultivators
Poplarville disc
54A blade
Gaylott scoop
193 Moldboard plow
Cub 22 mower
Woods 42
IH C-2
174 Planter/Fertilizer
Rotary Hoe

Re: Firing it up Again..... Any tips or tricks?

Postby Mike in Louisiana » Tue Jun 25, 2013 8:20 am

Don't forget to grease the throw out bearing (TOB)
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
User avatar
Mike in Louisiana
501 Club
501 Club
 
Posts: 4087
Joined: Tue Feb 15, 2005 10:10 am
Location: LA, Doyline
Zip Code: 71023
Circle of Safety Award
Circle of Safety: Y

Re: Firing it up Again..... Any tips or tricks?

Postby Stanton » Tue Jun 25, 2013 10:51 am

Might want to refer to the Owner's Manual for all the various lube and fluid locations before cranking her up.

Here: http://www.cleancomputes.com/Cub/Cub%20 ... index.html
User avatar
Stanton
501 Club
501 Club
 
Posts: 2167
Joined: Mon Jun 22, 2009 6:56 am
Location: Lone Jack, MO
Zip Code: 64070
Tractors Owned: 1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
1949 Farmall Cub, serial #65937
Cub-54 Blade
Cub-193 Moldboard Plow
Cub No. 23-A Tractor Disc Harrow
Grosshart Post Hole Digger
Prewitt Conversion Unit
McCormick-Deering No 100 Manure Spreader
Cub-22 mower
1945 Farmall H, serial #213,651
CCC 782, serial #715729
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: No registered users and 11 guests