Farmall Cub

does any one know if a model 54 blade from a 154 cub will fit a farmall cub or a older lowboy there is a couple for sale locally and I was wondering how much changing id have to do to make them work

the front blade for a 154 was a completely different blade than the 54 blade use on a standard cub. if the ones for sale are actually from a 154 you will have to fabricate a lot of hardware.

Here is a link to a 154 blade on Ebay
http://www.ebay.com/itm/OFFICIAL-IH-Int ... 3382efda47

Go here and scroll down to see pictures of the cub blade
http://www.tm-tractor.com/gim/gim_001.htm

I see what u mean that's ashame one still had original paint on for 200 bucks sounded too good to be true, if any one needs one there on craigs list the nice one is in Doylestown pa the other in central jersey

The blade proper and the frame it attaches to is the same as regular/loboy cub. The parts between it and the tractor are completely different. There is one close by for $200, if I had the money it would be in my shed moded to work on one of my cubs.