Farmall Cub

Posted: **Mon Jul 01, 2013 4:32 pm**

Last fall out of the blue the engine speed ran out of control. This spring I took the governor off and cleaned it so the weights move freely. After reassembly the problem still exists. Can the throttle spring be the culprit? It's driving me and my mechanic crazy, lawn is getting long. The unit is a 1949 so it might be waiting for social security.

Posted: **Mon Jul 01, 2013 4:47 pm**

First thing to check is that the throttle and choke rods/controls are connected to the correct carburetor control.

Mixed up than the choke controls the throttle - set at full engine rpms.

Posted: **Mon Jul 01, 2013 5:36 pm**

Eugene, thanks for your reply. Yes I triple checked that.

Posted: **Mon Jul 01, 2013 8:44 pm**

John:

G'day to you and welcome to the forum. Sorry that you are having problems with the governor. Suggest that if you haven't already, spray all the connections in the governor linkages with a good penetrating oil, let sit a while, spray again, let sit - then try to move the linkages. Keep doing it until the linkages are free and move easily. Hopefully this will help.

If you follow the links below, there are lots of resources available to our members. Enjoy the read

to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of the most important resources are Owner's Manuals, Parts Catalogs and Service Manuals. The Cub Manual Server is the home of the jpg versions and the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php]PDF Manuals[/url] -- well the pdf's of course Enjoy!.

Farmall Cub

can't control engine speed-1949 Cub

can't control engine speed-1949 Cub

Re: can't control engine speed-1949 Cub

Re: can't control engine speed-1949 Cub

Re: can't control engine speed-1949 Cub