Page 1 of 1
Starter Tag
Posted: Tue Jul 02, 2013 4:22 pm
by PVF1799
My starter for some reason is missing the tag. The rivets are there the tag is gone. Is there anyway to get just the tag?
Ken
Re: Starter Tag
Posted: Tue Jul 02, 2013 4:24 pm
by tst
steiner sells them but you have to stamp the #s in it
Re: Starter Tag
Posted: Tue Jul 02, 2013 4:31 pm
by PVF1799
tst wrote:steiner sells them but you have to stamp the #s in it
Suppose Steiner sells a metal stamp kit also. I'll check their catalog and website tonight.
Thanks
Re: Starter Tag
Posted: Tue Jul 02, 2013 4:57 pm
by Bob McCarty
Re: Starter Tag
Posted: Tue Jul 02, 2013 5:49 pm
by PVF1799
I like this one - it's Made in the USA
http://www.steinertractor.com/ABC511-blank-starter--generator--distributor-tag-for-6-volt-delco-remy-with-2-rivets.
Now where does one get the stamp set, with something close to the correct font?
Re: Starter Tag
Posted: Tue Jul 02, 2013 6:53 pm
by calcub
Harbor Freight? I have bought several sizes from them over the years.
Re: Starter Tag
Posted: Tue Jul 02, 2013 8:05 pm
by Jim Becker
Re: Starter Tag
Posted: Tue Jul 02, 2013 9:10 pm
by indy61
Any parts missing or cannot be found, chrome em.
viewtopic.php?f=1&t=77604
Re: Starter Tag
Posted: Wed Jul 03, 2013 7:57 am
by gitractorman
Ken,
Check with a local armature / automotive electric repair shop. I'll bet that they have a pile of junk starter cases and can probably find one exactly for your starter. It's a pretty common starter, used in just about anything built in the 1950s/1960s. If you want, I've got a local shop I use all the time, and I can check with them. Just let me know.
Bill
Re: Starter Tag
Posted: Wed Jul 03, 2013 9:25 am
by Dave F.
Take your blank tag to your local jewler, Most of them do engraving. Dave F.