Swinging Draw Bar Anchor

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Swinging Draw Bar Anchor

Postby 169Cub » Thu Jul 04, 2013 9:01 am

What is a "swinging drawbar anchor? And what does it do? I hate asking questions like this but I couldn't find any information about this on the search function for our site. I found this on ebay and am confused on its use and purpose.

http://www.ebay.com/itm/Nice-Good-IH-Fa ... 3383820c71
Lovin' IH for over a decade.
169Cub
Cub Star
Cub Star
 
Posts: 74
Joined: Mon Jun 25, 2012 4:23 pm
Zip Code: 54904
eBay ID: jsdnar
Tractors Owned: Original Cub Cadet
100
123
126
129
169 x2
1650
782
1957 Farmall Cub
John Deere 3120

Re: Swinging Draw Bar Anchor

Postby Rudi » Thu Jul 04, 2013 9:06 am

Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Swinging Draw Bar Anchor

Postby 169Cub » Thu Jul 04, 2013 9:12 am

Ok, thank you that does help. I am still not sure what purpose it does, and why it would be needed? Is it for extra strength? I have a good strong understanding of Cub Cadets, but I am a new-be on the Farmall Cubs...
Lovin' IH for over a decade.
169Cub
Cub Star
Cub Star
 
Posts: 74
Joined: Mon Jun 25, 2012 4:23 pm
Zip Code: 54904
eBay ID: jsdnar
Tractors Owned: Original Cub Cadet
100
123
126
129
169 x2
1650
782
1957 Farmall Cub
John Deere 3120

Re: Swinging Draw Bar Anchor

Postby Rudi » Thu Jul 04, 2013 9:27 am

If you look at the Swinging Drawbar you will see that there are 3 main components. The Anchor Bar (# 1), Swinging Drawbar (# 5) and the Drawbar (# 8). # 5 swings on # 8 so that the # 5 can move between both sides of the drawbar. #1 is the pivot point for the setup. Without it, no swinging drawbar.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Swinging Draw Bar Anchor

Postby tst » Thu Jul 04, 2013 9:44 am

here is a pic of a swinging drawbar, it is used for with a disc harrow for example so when making sharp turns the implement does not hit the tires by allowing it to swing side to side riding on the fixed drawbar
Tim
Attachments
swingindbar.JPG
swingindbar.JPG (177.63 KiB) Viewed 403 times
tst
501 Club
501 Club
 
Posts: 1503
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety Award
Circle of Safety: Y

Re: Swinging Draw Bar Anchor

Postby tmays » Thu Jul 04, 2013 9:47 am

Very desirable in combination with the cub 23a disc harrow
Thomas
tmays
501 Club
501 Club
 
Posts: 1428
Joined: Wed May 11, 2011 8:59 pm
Location: Raymond, MS
Zip Code: 39154
Tractors Owned: 1972 Cub
1947 Cub
1952 Cub
152 plow
1953 Farmall Super C
154 Cub Loboy
44 LB Woods mower
23A disk
144 Cultivators
Poplarville disc
54A blade
Gaylott scoop
193 Moldboard plow
Cub 22 mower
Woods 42
IH C-2
174 Planter/Fertilizer
Rotary Hoe

Re: Swinging Draw Bar Anchor

Postby 169Cub » Fri Jul 05, 2013 6:53 am

Ok, now I see. Thank you for the answers.
Lovin' IH for over a decade.
169Cub
Cub Star
Cub Star
 
Posts: 74
Joined: Mon Jun 25, 2012 4:23 pm
Zip Code: 54904
eBay ID: jsdnar
Tractors Owned: Original Cub Cadet
100
123
126
129
169 x2
1650
782
1957 Farmall Cub
John Deere 3120

Re: Swinging Draw Bar Anchor

Postby Bus Driver » Fri Jul 05, 2013 7:40 am

It "pulls" the swinging drawbar in addition to providing the pivot point. The seller describes it as good. I describe it as bent, as in "needs some straightening". If one wanted to make parts of the swinging drawbar assembly in a home shop, the part listed on eBay is the more difficult of those. The other parts are easier.
Luck favors those who are prepared
User avatar
Bus Driver
Team Cub Mentor
Team Cub Mentor
 
Posts: 2619
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Swinging Draw Bar Anchor

Postby John *.?-!.* cub owner » Fri Jul 05, 2013 10:11 am

Bus Driver is right, it does need some straightening in the center, but could be used as is, or not too hard to straighten. On Cubs the main use was for the 23A disk harrow, it made turning easier that it gave a pivot point both at the anchor and at the harrow hitch and allowed shorter turns to be made with less strain on the equipment. On larger tractors it was pinned to the side to line up the right wheel of pull type plows in the furrow, even to move a baler to the side a little to have more room to get to the windrow.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19101
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Swinging Draw Bar Anchor

Postby Scrivet » Fri Jul 05, 2013 9:35 pm

When my 23A is hooked directly to the regular drawbar and making a very short turn the rear gangs will actually slide sideways the opposite way of the turn (turn left the rear gang will slide to the right in the turn).

The swinging drawbar is good for a 23A disc but not so good for backing up a trailer. You can still use it, just drop a hitch pin on each side of it to keep it from swinging.
Scrivet
501 Club
501 Club
 
Posts: 1314
Joined: Sun Apr 19, 2009 9:51 pm
Location: MO, Potosi
Zip Code: 63664

Re: Swinging Draw Bar Anchor

Postby John *.?-!.* cub owner » Sat Jul 06, 2013 8:48 am

A disadvantage of the swinging drawbar is that it has to be removed to use many attachments.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19101
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Swinging Draw Bar Anchor

Postby Denny Clayton » Sat Jul 06, 2013 8:51 am

Scrivet wrote:When my 23A is hooked directly to the regular drawbar and making a very short turn the rear gangs will actually slide sideways the opposite way of the turn (turn left the rear gang will slide to the right in the turn).

The swinging drawbar is good for a 23A disc but not so good for backing up a trailer. You can still use it, just drop a hitch pin on each side of it to keep it from swinging.

Kinda like trying to push a log chain :?: :lol:
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
501 Club
501 Club
 
Posts: 3587
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: No registered users and 3 guests