turned over my fcub today
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
3 posts
• Page 1 of 1
turned over my fcub today
by BigBill » Sun Jul 07, 2013 6:09 pm
It's been sitting for 3 years with a broken drive shaft now but I ran seafoam In the gas and oil. I cranked her over with just a battery slow and the rain cap had four steady pops out of it. All the valves seem to be working. I need to start her up with it split to let her run. I have all the parts, gaskets and seals for the tranny and finals. Once I get the doctors ok to work it's a go. I'm going to plow this winter with it. I miss it. Right now my son's are helping me out.
Last edited by BigBill on Mon Jul 08, 2013 11:04 pm, edited 1 time in total.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- BigBill
- 5+ Years
- Posts: 5705
- Joined: Sat Jul 22, 2006 5:02 pm
- Location: in northern usa
- Zip Code: 00000
Re: turned over my fcub today
by Bob McCarty » Sun Jul 07, 2013 7:25 pm
BigBill, From the title of the post I was afraid you had rolled one. Glad to see it was something else.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Bob McCarty
- Team Cub Mentor
- Posts: 5642
- Joined: Tue May 25, 2004 8:02 pm
- Location: CO, Longmont
- Zip Code: 80501
- Circle of Safety: Y
Re: turned over my fcub today
by BigBill » Sun Jul 07, 2013 8:27 pm
Bob I fell off a cub cadet that had a stuck clutch while being lazy trying to free it up. I got ran over by a front wheel not thinking again. I still have the marks on my leg three or four years later. Having the larger tires on the cadet saved me with more ground clearance.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- BigBill
- 5+ Years
- Posts: 5705
- Joined: Sat Jul 22, 2006 5:02 pm
- Location: in northern usa
- Zip Code: 00000
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests
|
|