Farmall Cub

I am looking for the bushing that goes in the end of the ram to the rockshaft. I have had my CNH dealer look for it but to no avail.

I have the following specs:
ID .685 or 11/16
OD .775 to .80 or 13/16"

This all I could come up with from looking through older posts and taking my own measurements. I can find all kinds of 3/4" OD bushings but none 13/16".

I need to replace this bushing as there is nothing left.

Thanks a bunch

McMaster Carr has bushings that are 13/16" OD, but ID is 5/8" so you'd have to have it milled or drilled out to 11/16".