Page 1 of 1

Deluxe Seat

Posted: Fri Jul 19, 2013 12:21 pm
by Jgeremino
Hi...I would like to find out dimensions of deluxe seat frame also the diameter of the round stock back rest and is it hollow or solid Thanks John

Re: Deluxe Seat

Posted: Fri Jul 19, 2013 12:42 pm
by Bob McCarty
The outside dimension of the seat is 15 3/8" x 20 1/4". The hollow pipe is 7/8' and is pinched on the ends where it is welded to the base. Both the arms and back flair outward from the base with multiple curves. I'm not sure how to give you dimensions for that. If you know someone you can borrow one from, you could duplicate the pipe bends from it.

Bob

Re: Deluxe Seat

Posted: Fri Jul 19, 2013 1:00 pm
by Jgeremino
Thanks Bob.....Going to try to build two person deluxe seat round pipe going to be hardest to duplicate. Thanks again John

Re: Deluxe Seat

Posted: Fri Jul 19, 2013 1:35 pm
by Winfield Dave
John, would really like to see pics of it when you are finished. :D

Re: Deluxe Seat

Posted: Sun Jul 21, 2013 4:44 am
by gusbratz
i was thinking about doing the same thing, i have some small seats out of a short bus that i was going to use. they would be just right for 2 people.