Sat Jul 20, 2013 6:30 am
A guy I know said he has a set of split rear wheel weights for a cub. I've never heard of them. Does anyone have any info on them?
Sat Jul 20, 2013 8:48 am
I have never seen the split rear weights for a cub, but have seen split weights for the front, they are rare and sought after. There were some aftermarket manufacturers that may have made the rear ones. Also, remember that just because they were on a cub does not mean they were made for it.
Sat Jul 20, 2013 10:26 am
Never seen an OEM split rear for the Cub. Maybe some other brand that just happens to fit. There are split rears for the C, SC, H, SH, M & SM.
Sat Jul 20, 2013 4:53 pm
Check them out, they may be front split weights on the rear of a cub (cadet)
Sat Jul 20, 2013 7:06 pm
Got the numbers off them 369509 R1 They have the IH stamp in them.
Sat Jul 20, 2013 7:48 pm
Pic violation! Get us a picture, Kirk.
Sat Jul 20, 2013 8:00 pm
Looks like for 24" wheels but not Cub. A google search of the part number brought up.....http://www.robertstractor.com/servlet/the-3894/INTERNATIONAL-TRACTOR-REAR-WHEEL/Detail
Sun Jul 21, 2013 4:51 am
That what they look like. They look like they have different holes to mount on different model tractors. owner told me he held them up to his cub and thinks they'll fit. I said the center hole looks to big for a cub but then again I have a set of A's on my one cub and they work fine.
Sun Jul 21, 2013 9:27 am
If they will be on the valve stem side make sure they have an opening that will match the valve stem.
Sun Jul 21, 2013 2:39 pm
I saw them Friday at Jacktown heard same story so they must be the same ones. Man was from Columbia NJ wanted 100 for the pair.
Mon Jul 22, 2013 8:02 am
I have removed those style weights from IH 240 and 404 Utility Tractors. I believe that they have same bolt pattern as the A-140 series, weight is about the same as a one piece weight.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.