Farmall Cub

A guy I know said he has a set of split rear wheel weights for a cub. I've never heard of them. Does anyone have any info on them?
Thanks, Kirk

I have never seen the split rear weights for a cub, but have seen split weights for the front, they are rare and sought after. There were some aftermarket manufacturers that may have made the rear ones. Also, remember that just because they were on a cub does not mean they were made for it.

Never seen an OEM split rear for the Cub. Maybe some other brand that just happens to fit. There are split rears for the C, SC, H, SH, M & SM.

Check them out, they may be front split weights on the rear of a cub (cadet)

Got the numbers off them 369509 R1 They have the IH stamp in them.

Pic violation! Get us a picture, Kirk.

Looks like for 24" wheels but not Cub. A google search of the part number brought up.....
http://www.robertstractor.com/servlet/the-3894/INTERNATIONAL-TRACTOR-REAR-WHEEL/Detail

That what they look like. They look like they have different holes to mount on different model tractors. owner told me he held them up to his cub and thinks they'll fit. I said the center hole looks to big for a cub but then again I have a set of A's on my one cub and they work fine.
kirk

If they will be on the valve stem side make sure they have an opening that will match the valve stem.

I saw them Friday at Jacktown heard same story so they must be the same ones. Man was from Columbia NJ wanted 100 for the pair.

I have removed those style weights from IH 240 and 404 Utility Tractors. I believe that they have same bolt pattern as the A-140 series, weight is about the same as a one piece weight.