Page 1 of 1
Cub Belt Pulley Unit
Posted: Wed Aug 14, 2013 10:13 pm
by SONNY
Did get a belt pulley unit for a cub.----what would be average fair price for one of them?----I probable went a little over on this one, but its the only one I have ever seen around here! thanks; sonny
Re: Cub Belt Pulley Unit
Posted: Wed Aug 14, 2013 11:10 pm
by Rudi
Sonny:
I have seen the prices go from $30.00 to $150.00 or more on
for one in good shape.
Famall Cub Belt Pulley Also depends if the pulley comes with it or not.
Re: Cub Belt Pulley Unit
Posted: Wed Aug 14, 2013 11:28 pm
by Hengy
Whatcha going to use it for, Sonny??
Re: Cub Belt Pulley Unit
Posted: Thu Aug 15, 2013 4:44 am
by pickerandsinger
Sonny I was Looking into one on Ebay...45.00 plus shipping 12.58....8 3/4 dia x 4 1/2 wide...Item # 200948360849...I never bought it and I think it has been relisted....Dave
Re: Cub Belt Pulley Unit
Posted: Thu Aug 15, 2013 5:26 am
by v w
I recently paid $65 for the angle drive. No pulley. Local purchase so no shipping made it attractive. Vern
Re: Cub Belt Pulley Unit
Posted: Thu Aug 15, 2013 7:53 am
by Buzzard Wing
I can tell you the parts to rebuild one is about $60.
Re: Cub Belt Pulley Unit
Posted: Thu Aug 15, 2013 9:51 am
by Rudi
Buzzard Wing wrote:I can tell you the parts to rebuild one is about $60.
And it is a fun project
Oh .. you gotta pay attention to that Hyatt 1204T - I am still trying to source it in Canada. I know where they are -- just trying to get them here in town is proving to be extremely difficult.
Re: Cub Belt Pulley Unit
Posted: Fri Aug 16, 2013 7:46 am
by Buzzard Wing
Rudi, that is the only 'Cub' part I gave up for unobtainable.... You know where to get them, right?? Stupid me put all the seals and bearings in the one of the Cub's Mott BEFORE I pulled the gears out of the biodiesel bath... somewhere along the line someone skipped some spacers and the gears are pretty gaffed up. That explains why that mower was so loud.
I flushed out one I got at Boss Hog's fest (never used!) and put it on the mower....
Pull the bevel gear before trying to remove the shaft.... is my tip of the day. Otherwise the key will hang on the bearing and gaff up the key slot and bearing.
Re: Cub Belt Pulley Unit
Posted: Sun Aug 18, 2013 2:15 pm
by SONNY
Mine is complete with pulley,---- it had a reserve of $105. and my high bid was $95, so sale people asked if I was ok with $105. and I went with that, thinking it might be close in the price range!-- thanks guys!!! sonny
Re: Cub Belt Pulley Unit
Posted: Sun Aug 18, 2013 3:16 pm
by danovercash
Guess I was lucky, got mine at an estate auction with a pile of other stuff (some orange) for $10.00. Has the flat pulley, now I need a V pulley so I can make ice cream or gen electricity or pressure wash.
Re: Cub Belt Pulley Unit
Posted: Sun Aug 18, 2013 6:42 pm
by Rudi
Larry:
Yup, I have them tagged on
but trying to get them through Motion is proving to be a huge headache. Motion apparently has 1,600 of them somewhere here in Canada but I can't get any of em to Moncton
So I guess I will just have to order some and maybe pick em up at Cecil's.