Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Hi Ricky, I really appreciate your wealth of experience , with my hobby welding ( which nearly came to an end ,with a new pacemaker) ! Every bump forward with new ways and techniques, are always another "feather in my knowledge hat" , with different ways to resolve the issues on repairing the old iron ! Thanks again Ricky, for you time, devoted to this post,
Lee Petrie , Joliet, IL.
Success = not giving up??? Are the final drives on Cubs Cast "iron"? or cast steel? I have welded since I was a kid (now 46) and for a few years as a job. I apparently don't know diddley about welding cast iron because 2 out of 3 times I failed. First attempt was a Ford engine block with a cracked freeze plug hole - kept chasing the crack and ended up at the oil pan before i sold it for parts. Used stick welder with 95 nickle rod, preheated and peened as it cooled, even drilled a tiny hole at the end of the cracks. Second attempt was a Farmall Cub front casting, same technique and same results...It cracked again in little places. Bought a new casting. Third attempt was a final drive flange on a Farmall Cub where it bolts to the axle housing...Ground everything to a bevel leaving just enough of the break to aid in aligning all the broken pieces (lots of pieces) then clamped it to something flat. I remember keeping it clamped and welding it on one side then unclamping and welding the flat side a little at a time to prevent warping. Used my wire welder with standard wire and 75/25 gas. Ground then flat filed welds flush after the repair. SUCCESS After painting, you would never know it was welded and have used the tractor for years...no cracks no problems. Go figure??? Thats my experience for what it is worth. Any thoughts on my experience?
Dig a hole in the yard--build a fire in it -- heat the casting in the HOT ashes -- weld it --throw it back in the ashes and cover it with ashes then cover it with dirt for a few days to let it cool slow and even.
Stainless rod is the way to go by my limited experience.
Make it your ambition to lead a quiet life, to mind your own business and to work with your hands, just as we told you, so that your daily life may win the respect of outsiders and so that you will not be dependent on anybody.
I feel lucky I just take it next door and say Al this needs fixin. He does it or says let me have Johnny do it. Al is retired and Johnney is his son and still working. I am blessed
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
Sounds like I need to let one of you guys repair my cracked final for a spare!
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
Who is online
Users browsing this forum: No registered users and 9 guests