Page 1 of 1

Pan Seat Questions

Posted: Thu Aug 22, 2013 2:50 pm
by indy61
1- Were all pan seats padded or were they bare metal in the early years?
2- Were there different colors for the covers? Early ones black, later silver?
3- Did they all have a drain hole with brass grommet on the cover or was this an option?

Re: Pan Seat Questions

Posted: Thu Aug 22, 2013 7:25 pm
by Rudi
indy61 wrote:1- Were all pan seats padded or were they bare metal in the early years? No and Yes
2- Were there different colors for the covers? Early ones black, later silver? No and Yes
3- Did they all have a drain hole with brass grommet on the cover or was this an option? No and Yes - qualified


Bare pan seats would have been shipped as the norm from the factory unless ordered with the upholstered seat or the upholstered detachable seat pad.

TC-37A (5-2-49)
351 880 R91 Seat Frame
351 438 R91 Detachable Seat Pad
351 960 R91 Upholstered Seat
351 560 R91 Upholstered Seat Machine (I think this is the one with the drain hole but will have to look it up)

TC-37C Parts Catalog (08-29-52)
351 880 R92Seat Frame

TC-37D Revision 1 (Revised 12-54)
357 581 R91 Attachment Upholstered Seat, Deluxe

Far too many lines for me to copy here .. simply lookem up in the parts catalogs under Chassis.

This is a Instruction leaflet that I got on :eBay: a while ago.

Image Image

Re: Pan Seat Questions

Posted: Thu Aug 22, 2013 9:14 pm
by Jim Becker
From what I have seen, all Cub pan seats came with a drain hole. Seats without the drain came from another tractor model.

Early Cub seats were black, later were silver.

Re: Pan Seat Questions

Posted: Thu Aug 22, 2013 9:23 pm
by Rudi
Jim is correct...

It is kinda plain from the booklet above ... the early seats were black and had a grommet.

It doesn't show it or spell it out in the Parts catalog though..

Image

Re: Pan Seat Questions

Posted: Fri Aug 23, 2013 8:17 pm
by Posco
My Cub came to me with the remnants of an upholstered seat. I removed what was left, wire wheeled the pan, primed it and painted it red. Looks great to me and I'm pretty fussy.

Re: Pan Seat Questions

Posted: Sat Aug 24, 2013 3:31 am
by Eoghan
boy, I wish mine were padded! I just plowed a couple of acres the other day and my rear didn't thank me for it...

Re: Pan Seat Questions

Posted: Sat Aug 24, 2013 6:29 am
by Rudi
Eoghan wrote:boy, I wish mine were padded! I just plowed a couple of acres the other day and my rear didn't thank me for it...


There are tie on pads that are available at different places. As indicated in the pamphlet this was an option.

TRACTOR SEAT CUSHION Fits FARMALL H, M, 300, 450, Cub

Image

or you can get an aftermarket replacement:

New IH Farmall Cub Tractor Silver Canvas Upholstered Pan Seat w/ Brass Ring Hole

Image

Re: Pan Seat Questions

Posted: Sat Aug 24, 2013 8:32 am
by danovercash
Or you could have Darrel Darst re upholster yours!
Link to PVF1799:

Hi All - The big day is here. The new seat arrived. I actually unpacked it right in the middle of a conference call.....Could not wait another moment. Darrell did an awesome job. Another fine recommendation from this forum. Thanks all.


Refurbished Seat 1
IMG_2538 (800x574).jpg (368.81 KiB) Viewed 199 times


Refurbished Seat 2
IMG_2539 (800x746).jpg (436.48 KiB) Viewed 199 times

Re: Pan Seat Questions

Posted: Sat Aug 24, 2013 9:43 am
by Jim Becker

Re: Pan Seat Questions

Posted: Sat Aug 24, 2013 12:30 pm
by danovercash
Thanks Jim. Also scroll down till you find the seat pix (doing this on phone)