Help needed putting my cub back together

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 12:06 pm

I was given this White Cub to fix, repair, get working again for use a a scuffler in the garden. I have had this thing for 3 yrs and it's still not done.
Biggest problem is the motor is really rusted up inside, valves, ports in the block, manifold all rusted bad. It sat outside in the rain too long.
So I bought a good running parts tractor, Red, to make 1 good one from the 2, The parts tractor is what I going to use and what ever parts are better on the White one will go on the Red one.
Right now I can't figure out how to put the 2 rear cultivators on, I can mount them same as they were on the White one but how do they lift, I seem to be missing parts.
I took pictures when I first got the White one but they don't show the hook up for the rear lift. I've had this thing so long I can't remember whether there was any thing there or not.
Pictures show what I got.

My pictures are too big to upload.
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby midmo » Mon Sep 02, 2013 12:24 pm

If you go to the bottom of this page and click on TM tractor parts that will take you to there sight. In the left hand side down near the bottom you will find How to hook up Implements.(click) At the very bottom you will find "Cultivator" check the photo out there. Hope this helps?
Ron
midmo
Cub Star!
Cub Star!
 
Posts: 244
Joined: Mon Dec 08, 2008 8:28 pm
Location: MO California
Zip Code: 65018
Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case
1968 38383 J 140
Circle of Safety Award
Circle of Safety: Y

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 1:18 pm

Thanks for the link and help, looks like I'm missing the round bar with the bracket in the middle.
Where to get one?


Thanks to midmo and to tmays who helped through PMs
Attachments
image.jpeg
image.jpeg (156.65 KiB) Viewed 930 times
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby Bob McCarty » Mon Sep 02, 2013 1:45 pm

Doug, Welcome to the Forum. Rudi lives in Dieppe, NB and may be able to refer you to some suppliers up north so you don't have to import and go through that hassle. He will probably be in NY in October and may be able to bring back the part if it's delivered there (if you can wait).

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5419
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 2:53 pm

Pictures
025.JPG
025.JPG (171.13 KiB) Viewed 893 times

026.JPG
026.JPG (172.13 KiB) Viewed 893 times

027.JPG
027.JPG (170.78 KiB) Viewed 893 times


Finally figured out how to upload my pictures here. :{_}:
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby mountain4don » Mon Sep 02, 2013 3:59 pm

How come the left tire is on backwards?
1959 International Cub Lo-Boy W/Fast hitch, 59 Woods, dozer blade, plow
1954 Farmall Super C W/Fast hitch, belly dozer blade
1950 Farmall M
mountain4don
Cub Star
Cub Star
 
Posts: 89
Joined: Tue May 05, 2009 9:54 am
Zip Code: 65101

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 5:29 pm

Both tires are N/G and loaded with calcium, but the rims are in much better shape than the other tractor.
Basically 1 has good tires , N/G rims,
the other has N/G rims, good tires.
Take all the best parts and put them on 1 tractor.
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby Boss Hog » Mon Sep 02, 2013 8:34 pm

you need the bar for the rock shaft, I have many of them but you would have shipping cost, TSI will be at Cecils and should have what you need and Rudi can smuggle it up north :d
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9658
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Help needed putting my cub back together

Postby Rudi » Mon Sep 02, 2013 9:33 pm

Okey dokey .. let's see now ....

Doug, ifn you can source one and get it to Cecil's, I can bring it back to NB with us. I will be going to Ottawa in a couple months I think .. if you can wait that long then we can possibly meet at the confluence of the 417 and the 401 .. around Cornwall or so. Or I can put it on the bus - much cheaper than Canada Post or any other method. Both Boss and Tim aka tst have ads in the (NEW) Classified Ads, work it out with them. Or and here is a novel idea .. you could have one made ... it isn't hard at all. Any competent welder should be able to follow this:

Image

Let us know.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 10:05 pm

Thanks for the info, looks like I need to move to the US.

The 1" bar in the drawing is it solid?
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby Boss Hog » Mon Sep 02, 2013 10:12 pm

DH1 wrote:Thanks for the info, looks like I need to move to the US.

The 1" bar in the drawing is it solid?

As a rock :D
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9658
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 10:19 pm

Thanks.

Another question what colour is the grill suppose to be on the Red tractors?
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby Rudi » Mon Sep 02, 2013 10:26 pm

Doug:

Yes it is a solid bar. The hole is drilled into the flat stock, rod is slipped through and then welded in place. Pretty basic welding.

Depends on what year .. on the '47 to '54 are woven wire grilles and are red. White showed up some time in '56.

You are much closer in many ways to the US than I am. Buffalo isn't that far if I remember correctly - 2 hours thereabouts. Cecil's is another 5 hours on the I-90. That is at least 3 hours less than I travel to get to Cecil's. It is a doable weekend .. might you think on the possibilities? Be a good place to meet a lot of really good folks and of course ... all kinds of parts hanging around or could be.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Help needed putting my cub back together

Postby DH1 » Mon Sep 02, 2013 10:33 pm

What happens at Cecil's, tractor show, swap meet?
Thanks Doug from Markham Ont. Canada
DH1
 
Posts: 24
Joined: Sun Jun 30, 2013 5:19 pm
Location: Markham Ont. Canada
Zip Code: l6b1a8

Re: Help needed putting my cub back together

Postby Rudi » Mon Sep 02, 2013 11:50 pm

Doug:

A CubFest .. CubFest Northeast to be exact. It is one heck of a weekend ..starts Friday evening and goes to Saturday evening or so. There are a lot of activities like carb workshops, splitting a Cub, etc. I think I am going to bring one of my engines and see what we can do with it. It is a real learning experience and it is 99% Cubs :D
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Next

Return to Farmall Cub

Who is online

Users browsing this forum: Jim Becker, Stevo944 and 7 guests