Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
14 posts • Page 1 of 1
Hello to all cub guys and gals.I recently joined your organization at a farm and tractor show out here in northern California. I have a 53M that I am restoring and my grandson Justin turned 8 and we just brought home a 49 cub for both of us to bring back to life. It was left out in the weather for almost ten years so I know we have our work cut out for us. He has plans of driving it in the labor day parade a year from now so we will most likely be asking for some help and suggestions along the way. Everyone on the forum board seems to be very friendly and helpful, we are looking forward to making new friends with this project. Thanks, Allan & justin
Allan and Justin:
G'day to you and congrats on acquiring your very 1st new to you Cub Be careful, these things are highly addictive and they tend to multiply when you least expect it.
Taking the time to teach your grandson the joys of old iron is really and I mean really . Not much better than that right Do enjoy this journey as it is a very special one for you both.
You might want to take a little time and read the information contained in the links below:
Allan and Justin, Welcome to the Forum. If you're used to working on an M, you'll find the Cub to have much lighter, more manageable parts. Plenty of info here, so if you have questions or problems, ask away.
"We don't need to think more,
we need to think differently."
Welcome to the Forum! Let us know if there is anything we can help out with.
Welcome to the forum. Enjoy the ride.
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Be sure to take LOTS of photos and post some during your process. You and Justin will enjoy sharing the memories with family and friends...and of course US!!!
Welcome to the forum and the world of Cubs!! Try to go to a Cubfest and you will learn a lot and perhaps get one or two of your own projects done!
Welcome from Tennessee! I hope you and your grandson have a ball with your cub. You both will make memories that will last your lifetimes, and for the grandson I hope that will be a long time. Good luck!
Welcome from the SF bay area...not many northern Californians here that I've seen...so you're in the right spot. I recently redid a '51 hi-crop and would have had a very difficult row to hoe (note agricultural metaphor) without the staggering quantity of knowledge and generosity of the kind folks here.
I've fixed electrical problems with a hammer
Hello Allan and Justin,
Welcome to the best Cub site there is. I think it's great that you and your grandson are embarking on what will probably be a very memorable experience for the both of you. I'll bet Justin is excited. Lot's of knowledgeable folks on here who are more than happy to help you guys out.
Welcome to the forum. Great place to spend time
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
It isn't hard. Read these: On The Forums
14 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests