Cub and Wagner assisting the Farmall H

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Cub and Wagner assisting the Farmall H

Postby John *.?-!.* cub owner » Thu Sep 05, 2013 9:20 pm

I needed to remove the belly hydraulic pump from the H, both to lighten it a little and to replace a couple of badly leaking oil seals. That pump is fairly heavy, and removing is interesting. IH made a couple tools that fit in each side for two men to let it down while a third removed the bolts. Since I did not have either the special tools or two extra helpers I decided to improvise. I pulled the Wagner in under the belly pump, and got some cribbing and a scrap of old composite truss. When I had everything fitted the way I wanted, I removed all but one bolt and tightened the loader up against the belly pump. I then removed the last bolt. i did it this way because the cribbing made access to the other 3 bolts difficult. Once the bolt was removed I just eased it down to the floor. turned out to be a pretty easy job.
Image
Image
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19453
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Cub and Wagner assisting the Farmall H

Postby Winfield Dave » Fri Sep 06, 2013 6:21 am

Good thinking John !!
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
User avatar
Winfield Dave
501 Club
501 Club
 
Posts: 2635
Joined: Thu Apr 22, 2010 2:31 pm
Location: PA, Middleport (Schuylkill County)
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety Award
Circle of Safety: Y

Re: Cub and Wagner assisting the Farmall H

Postby Barnyard » Fri Sep 06, 2013 6:45 am

That goes to show that with a little thought a Cub can be used for more than most people think. Thanks for sharing.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17865
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Cub and Wagner assisting the Farmall H

Postby Rudi » Fri Sep 06, 2013 6:53 am

Well done John. Improv is not just limited to a comedy club :big smile:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Cub and Wagner assisting the Farmall H

Postby John *.?-!.* cub owner » Fri Sep 06, 2013 9:28 am

Having 2 artificial hips, a bad back, and arthritis, plus working by myself most of the time I have learned to IMPROV a lot.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19453
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Cub and Wagner assisting the Farmall H

Postby Jim Becker » Fri Sep 06, 2013 9:59 am

John *.?-!.* cub owner wrote:IH made a couple tools that fit in each side for two men to let it down while a third removed the bolts.

Cub cranks work pretty well, maybe not if the cross pin is welded in place.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11921
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Cub and Wagner assisting the Farmall H

Postby John *.?-!.* cub owner » Mon Sep 09, 2013 9:55 pm

Did a little more IMPROV today. My grader/snow blade/carryall cub needed the rear main engine seal replaced, and I did not feel like pulling all the blade hardware etc. off.
Image
Image

I had been using the carryall, so the belly blade was already chained up, and I put a floor jack under it and pushed it up against the snow blade bracket to support torque tube, and used some bailing wire (standard item in every hill billy's tool box) to hold the arms for the front blade, and put a furniture mover under the carryall so I could roll the rear away and back as needed. I then used a sling with my engine hoist to support the rear of engine, and all went well.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19453
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.


Return to Farmall Cub

Who is online

Users browsing this forum: dmacarthur, midmo, ScottyD'sdad and 8 guests