Page 1 of 1

cultivating with fast hitch

Posted: Tue Sep 10, 2013 3:38 am
by Eoghan
Got a set of cultivators today! does anybody else cultivate with a fast hitch cub? I've done some searching around here and learned that there IS a difference in the mounting hardware between manual lift and touch control/fast hitch. I haven't tried to install yet, but i'm pretty sure they have the right stuff (at least for the fronts) since the previous owner had a fast hitch cub. I'm a little confused by the manual as well, because it says to lift the hitch bail to it's highest setting for clearance, but then they leave on the business end of the 1 point hitch.. that thing sits pretty low! It looks to me like it'll come off with just a couple of pins.. can I do that? or would there be nowhere to mount the lifters for the rear sweeps?

Re: cultivating with fast hitch

Posted: Tue Sep 10, 2013 4:20 am
by Kirk-NJ
Here are a couple of photos off TM's site
http://www.tm-tractor.com/gim/rgng-fh_001.htm
Hope this will help you

Kirk

Re: cultivating with fast hitch

Posted: Tue Sep 10, 2013 7:47 am
by baldwindiesel
Eoghan:
I have a regular set of 144 cultivators on my CUB with FH and there are two things that need to be done in order to make it work. If you PM me I can send you photos and details.


Baldwin diesel