This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rockshaft Pins
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Motion
- 10+ Years
- Posts: 11
- Joined: Wed Jun 26, 2013 10:09 am
- Zip Code: 70448
- Circle of Safety: Y
Rockshaft Pins
I'm missing both factory installed pins on the front rockshaft. Is there a part numbr for these or other sources. Would I need to buy another shaft and swap it put? Thanks
-
tst
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Rockshaft Pins
they are just pins that are welded on the back of the rockshaft, I think if you measure the hole they are 3/4", maybe 5/8", you can just make new ones and weld them in, or just by pins the hole size, chop them off and weld them on
Tim
Tim
Who is online
Users browsing this forum: No registered users and 50 guests
