A little lesson about Cub Implements for the new guys!

Tue Oct 01, 2013 8:23 pm

I took a little video of Jim Becker's walking tour at Cubarama so some of the new guys here could learn about some of the various implements that are used on Cubs. The video is not about the event, but about the implements that were there.

A big thanks to Jim for taking time to explain these to the many new folks who were there.



Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 6:15 am

Jim Becker that was an excellent and very informative walk-around talk you did on the Cub and related implements.
A talk and PICS are worth way more than a thousand words, as the old saying goes. Thankyou.

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 8:02 am

Enjoyed the video. Nice to see a couple of things I had only heard about. Vern

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 8:24 am

Thanks Jim and Bill !! Enjoyed learning some new info.

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 8:59 am

:applause: :applause: :applause: :applause: :applause: :applause:

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 9:28 am

:applause: :thumbsup: :applause: :thumbsup: :applause:

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 9:29 am

Thanks Bill for posting the videos and thanks Jim for the interesting and informative talks!

Re: A little lesson about Cub Implements for the new guys!

Wed Oct 02, 2013 11:03 am

Sorry about the wind noise. I was hard enough to hear even when the wind was a little subdued.

I've been doing this for several years. Each year is different because it depends on what is on display. Once or twice, I did it on both Friday and Saturday and it changed because of the implements that had come or gone between the two days. This year's was a little shorter than the past as the display area was a little light on variety (partly because it was a light year and partly because we started at 1 PM on Saturday and quite a bit had already been loaded out.

We had a few first timers in the crowd. I didn't get a chance to talk with them after we finished. I hope they found it worthwhile.