Page 1 of 1
engine assembly 48 cubhi
Posted: Tue Oct 22, 2013 6:49 pm
by scon506
hi everyone im a newbie too site. I AM assembling cub engine after maching the block and head. I need too know if there is lock washers on cam retainer plate and the idler gear bolt. I did not disassembly the engine,received block headand bag of bolts any help would be great thanks.
Re: engine assembly 48 cubhi
Posted: Tue Oct 22, 2013 7:58 pm
by ricky racer
I can't answer that question for you but if you take some time reviewing the manuals above, you will probably find what you are looking for. Oh yeah, welcome to the greatest Cub website on the planet!!!!
Re: engine assembly 48 cubhi
Posted: Tue Oct 22, 2013 8:04 pm
by SONNY
dealers parts exploded view will show location and number of all parts/nuts/bolts/etc. thanks; sonny
Re: engine assembly 48 cubhi
Posted: Wed Oct 23, 2013 8:15 am
by Don McCombs
Re: engine assembly 48 cubhi
Posted: Wed Oct 23, 2013 9:42 am
by Hengy
Additionally, while assembling the engine, make sure that the allen plug is in the block behind the front cam gear. Machine shops remove those to boil out the block and often forget to put them back in. If this plug is out, you will NOT get oil pressure on the tractor, and you will have to take it back apart to get to it. Now is the time to make sure that it is in.
The guys have you covered on finding the information in manuals for assembly...
Thanks!
Mike in PA