Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Weather and time finally worked in my favor and I got the pictures of the plow bottoms. The first 2 pictures are of the Rex bottom and the last 3 are of the Ace bottom.
I sprayed some WD-40 on the back of the Rex bottom to bring out the stenciling, there is not any visible stenciling on the Ace bottom, but I suspect it has worn off and would be similar styling.
Been following this post and kept thinking I wish somebody would post a picture because I haven't got a clue what they're talking about.
Well I got my wish and I still haven't got a clue
Scrivet it must be a Missouri think. I'm with you. I still haven't got a clue.
Well, so much for "The Show Me State" motto. Don't miss your chance on this one, John.
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Glad to finally see some pictures. Yes, your ace pictures show the same shear/point and moldboard as my 193 plow. I have sent some pics of mine to Rudi for him to post but he hasn't been on the forum much lately. Have been trying to find a source for replacement parts but no luck yet. Have posted the painted(stenciled) part #s for the ace in a previous post.
Here are Jerry's pix.
Ok from the land side to the point on the left (third pic., last post) doesn't look very wide. Did it take ten inches of soil? Wonder if it pulled easier than the cub plow? Thanks for the pictures. Brain is not as fogy.
Unworkable if completely turned over?
Could one of the FC.com "Plow Kings" explain to the rest of us plow newbie's, under what conditions a guy would want this? I seems to recall somebody putting on a plow set up/demo school at one of the Cub gatherings. Wish I could attend. I would think the science of the plow is more in depth than people think. Learning tons here. Thanks.
Next time you are out here in the Pacific NW see us at
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
The distance (width) from the landside across to the point is 9" as it appears in my pictures. This plow does turn the sod completely over against the previously plowed furrow. It works best or does the neatest job if I plow in second gear. Easily plows 6" deep. This is a cub 193 plow.
Well, in an effort to better understand why the different style bottom I recalled doing some research on an Oliver #19 wooden beam walking plow I purchased a little over a year ago and at that time I had found a book called The Oliver Plow Book: A Treatise on Plows and Plowing (1920). I remembered it had way more information than I needed to know. Looking it over again I found one of the sections was on moldboards. I scanned through that section and have a little better understanding of the different styles of moldboards now. The book is available as a free google ebook here:http://books.google.com/books/about/The_Oliver_Plow_Book.html?id=pSxJAAAAIAAJ
and with a neat lady reading it to you avaialble from The California Digital Library (hit the speaker button in the upper right corner of the book window) here: https://archive.org/details/oliverplowbooktr00bacorich
The moldboard section starts on page 97. Page 109 and 110 has what they call a Scotch type, that looks like the Canadian bottom to me, with an explanation of it's use.
Who is online
Users browsing this forum: bill schultz and 6 guests