Wed Nov 06, 2013 8:21 am
How hard is it to replace the RH rear axle nut oil seal on the final drive unit?
I don't know if I have to drop the whole unit or can I replace it simple and easy?
1949 Farmall Cub
Wed Nov 06, 2013 7:00 pm
If you are referring to the one where the planter drive mounts, simply remove the 3 bolts holding the cup around the drive and nut.
Wed Nov 06, 2013 10:24 pm
John is talking about this one under the plow depth lever mounting bar (the rusty thing). It's not supposed to have a cover like the left side by the way. http://www.tm-tractor.com/gim/mvc_4682s.jpg
Pic fom TM's implement hookup section. This is showing the drawbar reversed for mounting a 193 plow. The view is from the left side of the tractor, under the torque tube (visible in the top of the pic), and looking rearwards to the right side final.
Thu Nov 07, 2013 8:33 am
Thank you. At first I though the Right side was missing the cover. Glad to hear it supposed to be this way
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.