Re: Here We Go........

Wed Nov 27, 2013 4:21 pm

ricky racer wrote:No, it's front mounted but it is a Cub Leveling & Grader Blade.

Image

I sure do like your plow setup, very nice cub to

Re: Here We Go........

Wed Nov 27, 2013 9:07 pm

The plow has been a work in progress. It started out as a Cub 54 Leveling & Grader Blade. I added a power angle to it. The next transformation changed it from a Cub 54 to a Cub 54A Leveling & Grader Blade. The next transformation changed it into a real snow plow. viewtopic.php?f=64&t=48334&p=400726&hilit=snow+plow#p400726
Each modification has been an improvement and I think it's either at or near the end of it's evolution.

Re: Here We Go........

Thu Nov 28, 2013 12:19 am

Used my 54 blade for the first time today. we had about 5 inches of REALLY wet stuff. I don't have chains, but she pushed it around just fine. The only problem I had was when the blade was angled it wanted to dig up the driveway on the inward side... I think maybe the little prongs on the bottom were doing it. I bet it won't be a problem once the ground is really frozen.

Re: Here We Go........

Thu Nov 28, 2013 7:27 am

ricky racer wrote:The plow has been a work in progress. It started out as a Cub 54 Leveling & Grader Blade. I added a power angle to it. The next transformation changed it from a Cub 54 to a Cub 54A Leveling & Grader Blade. The next transformation changed it into a real snow plow. viewtopic.php?f=64&t=48334&p=400726&hilit=snow+plow#p400726
Each modification has been an improvement and I think it's either at or near the end of it's evolution.

You did an outstanding job on the plow, or should I say the the complete setup cub an all.
Happy Thanksgiving