Page 1 of 1
Underslung exhaust pipe source?
Posted: Wed Nov 27, 2013 11:38 pm
by Dale Finch
When I get my '55 cub, Ben, back together with its "new" engine and touch control, I will need a new exhaust pipe. The old one has a hole where it rubbed the hydraulic manifold...fortunately the manifold is intact. A friend has tried repairing it, but it is so badly pitted that there isn't much good metal. The last one I bought for my other '55, Bertha, was from TM, but they discontinued carrying them after the price went above $100.
So my question is, anyone have a good source for just the pipe ( from the exhaust manifold to the muffler)? Thanks!
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 6:58 am
by tmays
Case IH
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 7:19 am
by Jeff Silvey
Dale I sent you a PM.
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 9:11 am
by Dale Finch
Jeff Silvey wrote:Dale I sent you a PM.
Thanks, Jeff! See you at DSCF!!
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 11:14 am
by Xperimental
I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 11:57 am
by tmays
Xperimental wrote:I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?
No. You can try JP tractor or I'm sure a forum member may have one. I'm sure there are other sources
Re: Underslung exhaust pipe source?
Posted: Thu Nov 28, 2013 12:48 pm
by dgrapes59
Xperimental wrote:I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?
You might also try calling Hamilton Bob (site sponsor), I didn't see one listed but he may have one.
Good luck,
Re: Underslung exhaust pipe source?
Posted: Fri Nov 29, 2013 11:12 am
by mrfarmboy87
I replaced the one on my 55 and my 56 both of which I got from the local ih dealer, to extend the life of it I had it, the manifold, and the muffler ceramic coated
Re: Underslung exhaust pipe source?
Posted: Mon Dec 02, 2013 12:51 pm
by crazyjoe
Farmall cub forever $119.00 plus shipping here is there link
http://www.farmallcubforever.com
Re: Underslung exhaust pipe source?
Posted: Mon Dec 02, 2013 8:30 pm
by Buzzard Wing
There are two, long stripes have a different part number. You probably want 362 360 R1.
Re: Underslung exhaust pipe source?
Posted: Tue Dec 03, 2013 8:52 pm
by Don McCombs
Buzzard Wing wrote:There are two, long stripes have a different part number. You probably want 362 360 R1.
Does anyone know what the actual physical difference is?
Re: Underslung exhaust pipe source?
Posted: Tue Dec 03, 2013 9:25 pm
by tst
I have tried to put the early pipe on a late cub but it is bent different for the carb area and could not be used as it hit in several spots
Tim
Re: Underslung exhaust pipe source?
Posted: Tue Dec 03, 2013 9:58 pm
by Boss Hog
tst wrote:I have tried to put the early pipe on a late cub but it is bent different for the carb area and could not be used as it hit in several spots
Tim
I have not had that problem Tim.
Don McCombs wrote:Buzzard Wing wrote:There are two, long stripes have a different part number. You probably want 362 360 R1.
Does anyone know what the actual physical difference is?
The newer one is heaver and thicker