Underslung exhaust pipe source?

Wed Nov 27, 2013 11:38 pm

When I get my '55 cub, Ben, back together with its "new" engine and touch control, I will need a new exhaust pipe. The old one has a hole where it rubbed the hydraulic manifold...fortunately the manifold is intact. A friend has tried repairing it, but it is so badly pitted that there isn't much good metal. The last one I bought for my other '55, Bertha, was from TM, but they discontinued carrying them after the price went above $100.

So my question is, anyone have a good source for just the pipe ( from the exhaust manifold to the muffler)? Thanks!

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 6:58 am

Case IH

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 7:19 am

Dale I sent you a PM.

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 9:11 am

Jeff Silvey wrote:Dale I sent you a PM.

Thanks, Jeff! See you at DSCF!! :D

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 11:14 am

I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 11:57 am

Xperimental wrote:I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?

No. You can try JP tractor or I'm sure a forum member may have one. I'm sure there are other sources

Re: Underslung exhaust pipe source?

Thu Nov 28, 2013 12:48 pm

Xperimental wrote:I need one of these too. The exhaust pipe on my 1961 needs to be replaced. Is Case IH the only source?


You might also try calling Hamilton Bob (site sponsor), I didn't see one listed but he may have one.

Good luck,

Re: Underslung exhaust pipe source?

Fri Nov 29, 2013 11:12 am

I replaced the one on my 55 and my 56 both of which I got from the local ih dealer, to extend the life of it I had it, the manifold, and the muffler ceramic coated

Re: Underslung exhaust pipe source?

Mon Dec 02, 2013 12:51 pm

Farmall cub forever $119.00 plus shipping here is there link http://www.farmallcubforever.com

Re: Underslung exhaust pipe source?

Mon Dec 02, 2013 8:30 pm

There are two, long stripes have a different part number. You probably want 362 360 R1.

Re: Underslung exhaust pipe source?

Tue Dec 03, 2013 8:52 pm

Buzzard Wing wrote:There are two, long stripes have a different part number. You probably want 362 360 R1.

Does anyone know what the actual physical difference is?

Re: Underslung exhaust pipe source?

Tue Dec 03, 2013 9:25 pm

I have tried to put the early pipe on a late cub but it is bent different for the carb area and could not be used as it hit in several spots
Tim

Re: Underslung exhaust pipe source?

Tue Dec 03, 2013 9:58 pm

tst wrote:I have tried to put the early pipe on a late cub but it is bent different for the carb area and could not be used as it hit in several spots
Tim


I have not had that problem Tim.
Don McCombs wrote:
Buzzard Wing wrote:There are two, long stripes have a different part number. You probably want 362 360 R1.

Does anyone know what the actual physical difference is?

The newer one is heaver and thicker