Got a new filter today and as I trust nothing the PO did, I need to know which way it goes in.
One end is straight with a slight taper. The other end has a noticeable reduction in size at the end. Which end goes down into the filter canister?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
OIL FILTER ORIENTATION
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
vwfish
- 10+ Years
- Posts: 94
- Joined: Sun Jan 06, 2013 2:56 pm
- Zip Code: 53029
-
Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: OIL FILTER ORIENTATION
Try putting the bolt through the filter and it will become quite obvious. 
Tapered end down.
Tapered end down.
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
Who is online
Users browsing this forum: Super A and 46 guests
